/*************************************************************************
* Processor-specific object file. Contains SFR definitions.
*************************************************************************/
INPUT("processor.o")
/*************************************************************************
* Processor-specific peripheral libraries are optional
*************************************************************************/
OPTIONAL("libmchp_peripheral.a")
OPTIONAL("libmchp_peripheral_32MX220F032D.a")
/*************************************************************************
* For interrupt vector handling
*************************************************************************/
PROVIDE(_vector_spacing = 0x00000001);
_ebase_address = 0x9D003000;
/*************************************************************************
* Memory Address Equates
* _RESET_ADDR -- Reset Vector
* _BEV_EXCPT_ADDR -- Boot exception Vector
* _DBG_EXCPT_ADDR -- In-circuit Debugging Exception Vector
* _DBG_CODE_ADDR -- In-circuit Debug Executive address
* _DBG_CODE_SIZE -- In-circuit Debug Executive size
* _GEN_EXCPT_ADDR -- General Exception Vector
*************************************************************************/
_RESET_ADDR = 0x9D004000;
_BEV_EXCPT_ADDR = 0x9D004380;
_DBG_EXCPT_ADDR = 0x9D004480;
_DBG_CODE_ADDR = 0xBFC02000;
_GEN_EXCPT_ADDR = _ebase_address + 0x180;
/*************************************************************************
* Memory Regions
*
* Memory regions without attributes cannot be used for orphaned sections.
* Only sections specifically assigned to these regions can be allocated
* into these regions.
*************************************************************************/
MEMORY
{
kseg0_program_mem (rx) : ORIGIN = 0x9D004A00, LENGTH = 0x3600
kseg0_boot_mem : ORIGIN = 0x9D004490, LENGTH = 0x570
exception_mem : ORIGIN = 0x9D003000, LENGTH = 0x1000
kseg1_user_mem : ORIGIN = 0xBFC00400, LENGTH = 0x800
kseg1_boot_mem : ORIGIN = 0x9D004000, LENGTH = 0x490
debug_exec_mem : ORIGIN = 0xBFC02000, LENGTH = 0xFF0
config3 : ORIGIN = 0xBFC02FF0, LENGTH = 0x4
config2 : ORIGIN = 0xBFC02FF4, LENGTH = 0x4
config1 : ORIGIN = 0xBFC02FF8, LENGTH = 0x4
config0 : ORIGIN = 0xBFC02FFC, LENGTH = 0x4
kseg1_data_mem (w!x) : ORIGIN = 0xA0000000, LENGTH = 0x2000
sfrs : ORIGIN = 0xBF800000, LENGTH = 0x100000
}
SECTIONS
{
.config_BFC02FF0 : {
KEEP(*(.config_BFC02FF0))
} > config3
.config_BFC02FF4 : {
KEEP(*(.config_BFC02FF4))
} > config2
.config_BFC02FF8 : {
KEEP(*(.config_BFC02FF8))
} > config1
.config_BFC02FFC : {
KEEP(*(.config_BFC02FFC))
} > config0
.extra_prg_mem :
{
* (extra_prg_mem)
} >kseg1_user_mem
}