Schliesssystem

Schema

{Laptop,Handy,Tablet} <-> WRT <-> ethernet GPIO device <-> {Keymatic, Sprechanlage}

DING

Command Interface

The DING listens on *:2701/TCP for incoming connections. The protocol is ECMD with doorctl extensions.

mode set

doorctl mode set <mode>

sets the mode #Mode

Mode

The DING has a mode register for the inner door that is always set to one of the following values:

Mode	Default	LED value	Keymatic action when entering mode	ERT effect
locked	X	--RRR--	lock door	nothing
unlocked		OO-----	unlock door	nothing
unlocked+ert		-----GG	unlock door	retract safety catch

Pinout

• relais 1: keymatic.close
• relais 2: keymatic.open
• relais 3: siedle.open

Connector pinout

These are the pinouts of the two flat cables coming from entryphone and keymatic.

Siedle entryphone

• Pin 1: door opener connector a
• Pin 2: door opener connector b
• Pin 3: ERT connector a
• Pin 4: ERT connector b
• Pin 5-10: not used

Keymatic

• Pin 1: Pushbutton lock/unlock (?)
• Pin 2: Pushbutton common
• Pin 3: Pushbutton lock/unlock (?)
• Pin 4: RI common
• Pin 5: RI dooropener
• Pin 6: RI lock/unlock (?)
• Pin 7: RI lock/unlock (?)
• Pin 8: unused
• Pin 9: RI power supply
• Pin 10: RI power supply

Todo

• neuen Schliesszylinder installieren
• GPIO device installieren
• keymatic verkabeln und an GPIO device anschliessen
• sprechanlage an GPIO device anschliessen
• auth-system
• netzwerkconfig
• GPIO-Device korrekt aufhaengen
• Gemeinsame Stromversorgung
  • Fritzbox (?)
  • brickme (?)
  • Keymatic (12V)
  • DING (5V)
  • Telefon (?)
• Tuermagnet
• Temperatursensor
• Stromzaehlerleser