LED Cube/Building From Source

Aus Wiki CCC Göttingen
Zur Navigation springen Zur Suche springen

Getting the Sources

git clone http://www.0x53a.de/git/cube-3


Building the Bootloader

Requirements

You will need

  • gmake
  • avr-libc, avr-binutils, avr-gcc
  • avrdude
  • an ISP- or JTAG-Programmer like AVR ISP mkII, usbasp, or any (avrdude-compatible, if you want to use the Makefile) other.

Building

The bootloader is in the directory bootloader/firmware/. It can be built with 

cd cube-3/bootloader/firmware/
make

Flashing

To flash it, modify the bootloader/firmware/Makefile: 

AVRDUDE = avrdude -P usb -c avrispmkii -p m8 -p $(DEVICE)

to match your programmer. This is the line for AVR ISP mkII. If you have a programmer, you probably know how to do this, so I won't get into it.

Then apply fuse settings and flash: 

make fuse
make flash
Abgerufen von „https://wiki.cccgoe.de/w/index.php?title=LED_Cube/Building_From_Source&oldid=4216“