LED Cube/PCB Soldering Manual: Unterschied zwischen den Versionen

Aus Wiki CCC Göttingen
Zur Navigation springen Zur Suche springen
Keine Bearbeitungszusammenfassung
Keine Bearbeitungszusammenfassung
Zeile 1: Zeile 1:
A full schematic of the PCB can be downloaded here: [[File:cube.pdf]].
A full schematic of the PCB can be downloaded here: [[File:cube.pdf]].


==USB Resistors and Zener Diodes==
==USB Resistors==
[[File:cube-usb.png|thumb]]
[[File:cube-usb.png|thumb]]
First we solder R10, R11, R13, Z1 and Z2. You can see the resistor values in the schematic or in the table below, together with the color code marking:
First we solder R10, R11, R13, Z1 and Z2. You can see the resistor values in the schematic or in the table below, together with the color code marking:
Zeile 14: Zeile 14:
|R13||1500 Ohm||[[File:r-1500.jpeg|frameless|border]]
|R13||1500 Ohm||[[File:r-1500.jpeg|frameless|border]]
|}
|}
==USB Zener Diodes==
Additionally, we need two 3.6 V Zener diodes for the data lines.

Version vom 14. April 2012, 21:34 Uhr

A full schematic of the PCB can be downloaded here: Datei:Cube.pdf.

USB Resistors

First we solder R10, R11, R13, Z1 and Z2. You can see the resistor values in the schematic or in the table below, together with the color code marking:

Name Value Color Code
R10 68 Ohm
R11 68 Ohm
R13 1500 Ohm

USB Zener Diodes

Additionally, we need two 3.6 V Zener diodes for the data lines.