TVBGone/en

TVbgone with two SMD LEDs and two normal 5mm LEDs

This is a clone of the normal TVBGone Kit. TVBGone is a board, that tries to switch off every TV device. This one is build with almost only SMD parts, this board is smaller than the original.

PCB

P1:

1 - Reset

2 - GND

3 - Vcc

4 - SCK

5 - MISO

6 - MOSI

P2:

1 - Vcc

2 - GND

BOM

Necessary

Designator	Value	Part-No	Price / EUR	Count	Sum / EUR
R1	1 kΩ, 0805	R:	0.01	1	0.01
R3	10 kΩ, 1206	R:	0.01	1	0.01
R5	470 Ω, 0603	R:	0.01	1	0.01
C1	100nF, 0603	C:	0.01	1	0.01
C2	100uF	100uF,1206	0.34	1	0.34
C3, C4	22pF 0603	C:	0.01	2	0.02
T1, T2, T3, T4	NPN SOT23	BC817	0.04	4	0.16
T5	PNP SOT23	BC807	0.04	1	0.4
XTAL1	8Mhz hc49	Q 8 MHZ HC 49/US-SMD	0.26	1	0.26
LED5	yellow 0603		0.01	1	0.01
uC	micro controller SOIC	ATTINY85V-10SU	1.95	1	1.95
P1, P2	plug connector 6 Pol, 2 Pole		0.24	1	0.24
S1	switch		?	1	?
Sum					2.86

Infrared LEDs

The perfect LEDs aren't found till now. The SMD LEDs have a too big opening angle, so the power is not enough for switching the TV off. On the other hand with 10° you have to target very perfectly... Another problem is that the board haas a bug for the SMD LEDs, if these are solded, they can create a short circuit, but this will be fixed for the next version.

Designator	Value	Part-No	Price / EUR	Count	Sum / EUR
LED1, LED2, LED3, LED4	side LED 950nm,60°	Q65110A2463	0.35	4	1.40
LED1, LED2, LED3, LED4	5 mm, 950 nm, 10°	Q62703Q1820	0.27	4	1.08