Schliesssystem: Unterschied zwischen den Versionen
Marvin (Diskussion | Beiträge) (→Mode) |
Marvin (Diskussion | Beiträge) (→Pinout) |
||
Zeile 58: | Zeile 58: | ||
===Pinout=== | ===Pinout=== | ||
* relais 1: keymatic. | * relais 1: keymatic.lock | ||
* relais 2: keymatic. | * relais 2: keymatic.unlock | ||
* relais 3: siedle.open | * relais 3: siedle.open | ||
* relais 4: keymatic.open | |||
==Connector pinout== | ==Connector pinout== |
Version vom 28. März 2011, 08:43 Uhr
Schema
{Laptop,Handy,Tablet} <-> WRT <-> ethernet GPIO device <-> {Keymatic, Sprechanlage}
DING
Command Interface
The DING listens on *:2701/tcp for incoming connections. The protocol is ECMD with doorctl extensions.
mode set
doorctl mode set <mode>
sets the mode #Mode.
mode get
doorctl mode get
returns the currently selected #Mode.
inner door open
doorctl inner door open
retracts the safety catch of the inner door.
inner door open?
doorctl inner door open?
checks if the inner door is currently opened. This does not mean, that the safety catch is retracted but that the door is really standing open.
outer door open
doorctl outer door open
opens the outer door.
Mode
The DING has a mode register for the inner door that is always set to one of the following values:
Mode | Default | LED value | Keymatic action when entering mode |
ERT effect |
---|---|---|---|---|
locked
|
X | --RRR--
|
lock door | nothing |
unlocked
|
OO-----
|
unlock door | nothing | |
unlocked+ert
|
-----GG
|
unlock door | retract safety catch |
Led colors: Red, Orange, Green
To modify modes use the #mode set or #mode get commands. Also, you can cycle through modes using the pushbutton on the DING.
Pinout
- relais 1: keymatic.lock
- relais 2: keymatic.unlock
- relais 3: siedle.open
- relais 4: keymatic.open
Connector pinout
These are the pinouts of the two flat cables coming from entryphone and keymatic.
Siedle entryphone
- Pin 1: door opener connector a
- Pin 2: door opener connector b
- Pin 3: ERT connector a
- Pin 4: ERT connector b
- Pin 5-10: not used
Keymatic
- Pin 1: Pushbutton lock/unlock (?)
- Pin 2: Pushbutton common
- Pin 3: Pushbutton lock/unlock (?)
- Pin 4: RI common
- Pin 5: RI dooropener
- Pin 6: RI lock/unlock (?)
- Pin 7: RI lock/unlock (?)
- Pin 8: unused
- Pin 9: RI power supply
- Pin 10: RI power supply
Todo
neuen Schliesszylinder installierenGPIO device installierenkeymatic verkabeln und an GPIO device anschliessensprechanlage an GPIO device anschliessen- auth-system
- netzwerkconfig
- GPIO-Device korrekt aufhaengen
- Gemeinsame Stromversorgung
- Fritzbox (?)
- brickme (?)
- Keymatic (12V)
- DING (5V)
- Telefon (?)
- Tuermagnet
- Temperatursensor
- Stromzaehlerleser