Schliesssystem: Unterschied zwischen den Versionen

Aus Wiki CCC Göttingen
Zur Navigation springen Zur Suche springen
Zeile 5: Zeile 5:
==DING==
==DING==
===mode===
===mode===
The DING has a mode register that is always set to one of the following values:
The DING has a mode register for the inner door that is always set to one of the following values:
{| border=1 cellspacing=0 cellpadding=2
{| border=1 cellspacing=0 cellpadding=2
! Mode
! Mode

Version vom 28. März 2011, 08:30 Uhr

Schema

{Laptop,Handy,Tablet} <-> WRT <-> ethernet GPIO device <-> {Keymatic, Sprechanlage}

DING

mode

The DING has a mode register for the inner door that is always set to one of the following values:

Mode Default LED value Keymatic action when
entering mode
ERT effect
locked X --RRR-- lock door nothing
unlocked OO----- unlock door nothing
unlocked+ert -----GG unlock door retract safety catch

Pinout

  • relais 1: keymatic.close
  • relais 2: keymatic.open
  • relais 3: siedle.open

Connector pinout

These are the pinouts of the two flat cables coming from entryphone and keymatic.

Siedle entryphone

  • Pin 1: door opener connector a
  • Pin 2: door opener connector b
  • Pin 3: ERT connector a
  • Pin 4: ERT connector b
  • Pin 5-10: not used

Keymatic

  • Pin 1: Pushbutton lock/unlock (?)
  • Pin 2: Pushbutton common
  • Pin 3: Pushbutton lock/unlock (?)
  • Pin 4: RI common
  • Pin 5: RI dooropener
  • Pin 6: RI lock/unlock (?)
  • Pin 7: RI lock/unlock (?)
  • Pin 8: unused
  • Pin 9: RI power supply
  • Pin 10: RI power supply

Todo

  • neuen Schliesszylinder installieren
  • GPIO device installieren
  • keymatic verkabeln und an GPIO device anschliessen
  • sprechanlage an GPIO device anschliessen
  • auth-system
  • netzwerkconfig
  • GPIO-Device korrekt aufhaengen
  • Gemeinsame Stromversorgung
    • Fritzbox (?)
    • brickme (?)
    • Keymatic (12V)
    • DING (5V)
    • Telefon (?)
  • Tuermagnet
  • Temperatursensor
  • Stromzaehlerleser