AVR Toolchain: Unterschied zwischen den Versionen
Zur Navigation springen
Zur Suche springen
(debian/ubuntu packages) |
(→Udev Rules: neuer systax für atmel udev regel) |
||
| Zeile 10: | Zeile 10: | ||
==Udev Rules== | ==Udev Rules== | ||
if you want to connect to the device as normal user, you have to create a little udev rule. For debian like systems create a file in the folder /etc/udev/rules.d and reload udev (/etc/init.d/udev | if you want to connect to the device as normal user, you have to create a little udev rule. For debian like systems create a file in the folder /etc/udev/rules.d and reload udev (/etc/init.d/udev reload): | ||
$ cat /etc/udev/rules.d/z99_atmel.rules | $ cat /etc/udev/rules.d/z99_atmel.rules | ||
# Atmel AVR ISP mkII | # Atmel AVR ISP mkII | ||
SUBSYSTEM=="usb", | SUBSYSTEM=="usb", ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="2104", GROUP="plugdev", MODE="0660" | ||
# usbprog bootloader | # usbprog bootloader | ||
ATTRS{idVendor}=="1781", ATTRS{idProduct}=="0c62", GROUP="plugdev", MODE="0660" | ATTRS{idVendor}=="1781", ATTRS{idProduct}=="0c62", GROUP="plugdev", MODE="0660" | ||
Version vom 18. August 2011, 11:47 Uhr
Debian/Ubuntu
- Needed programs for running the code under debian unstable:
apt-get install avr-libc gcc-avr
- avrdude is available in the same name:
apt-get install avrdude
- libusb is needed for running the hostcode for the flower:
apt-get install libusb-1.0-0-dev
(tested on debian unstable, should also run under ubuntu)
Udev Rules
if you want to connect to the device as normal user, you have to create a little udev rule. For debian like systems create a file in the folder /etc/udev/rules.d and reload udev (/etc/init.d/udev reload):
$ cat /etc/udev/rules.d/z99_atmel.rules
# Atmel AVR ISP mkII
SUBSYSTEM=="usb", ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="2104", GROUP="plugdev", MODE="0660"
# usbprog bootloader
ATTRS{idVendor}=="1781", ATTRS{idProduct}=="0c62", GROUP="plugdev", MODE="0660"
# USBasp programmer
ATTRS{idVendor}=="16c0", ATTRS{idProduct}=="05dc", GROUP="plugdev", MODE="0660"
# USBtiny programmer
ATTRS{idVendor}=="1781", ATTRS{idProduct}=="0c9f", GROUP="plugdev", MODE="0660"
(from http://www.mikrocontroller.net/articles/AVRDUDE#Aufruf_unter_Linux_als_user_.28non-root.29)