LED Cube/PCB Soldering Manual: Unterschied zwischen den Versionen
Zur Navigation springen
Zur Suche springen
Marvin (Diskussion | Beiträge) Keine Bearbeitungszusammenfassung |
Marvin (Diskussion | Beiträge) Keine Bearbeitungszusammenfassung |
||
| Zeile 1: | Zeile 1: | ||
A full schematic of the PCB can be downloaded here: [[File:cube.pdf]]. | A full schematic of the PCB can be downloaded here: [[File:cube.pdf]]. | ||
==USB Resistors | ==USB Resistors== | ||
[[File:cube-usb.png|thumb]] | [[File:cube-usb.png|thumb]] | ||
First we solder R10, R11, R13, Z1 and Z2. You can see the resistor values in the schematic or in the table below, together with the color code marking: | First we solder R10, R11, R13, Z1 and Z2. You can see the resistor values in the schematic or in the table below, together with the color code marking: | ||
| Zeile 14: | Zeile 14: | ||
|R13||1500 Ohm||[[File:r-1500.jpeg|frameless|border]] | |R13||1500 Ohm||[[File:r-1500.jpeg|frameless|border]] | ||
|} | |} | ||
==USB Zener Diodes== | |||
Additionally, we need two 3.6 V Zener diodes for the data lines. | |||
Version vom 14. April 2012, 21:34 Uhr
A full schematic of the PCB can be downloaded here: Datei:Cube.pdf.
USB Resistors
First we solder R10, R11, R13, Z1 and Z2. You can see the resistor values in the schematic or in the table below, together with the color code marking:
| Name | Value | Color Code |
|---|---|---|
| R10 | 68 Ohm | 
|
| R11 | 68 Ohm |
|
| R13 | 1500 Ohm | 
|
USB Zener Diodes
Additionally, we need two 3.6 V Zener diodes for the data lines.