Wiki CCC Göttingen - Benutzerbeiträge [de]

LinuxFrüchten

2014-02-28T11:42:15Z

Miga: /* LinuxFrüchten */

=LinuxFrüchten=

Viele projekten benutzt [[Raspberry Pi]] oder OLinuxino [[Lime]] für Linux-basierte Kontrolle.

Hier ist die anfang für generale dokumentierung für Linux-auf-Arm, Linux GPIO etc. sachen in CCC.

Anderes billige Linux-basierte kontrollern:
# [http://www.watterott.com/de/86Duino-EduCake 86Duino] ist x86-kompatibel Mikrokontroller set mit 128MB RAM. (47e mit Brettchen, oder 36e in Arduino-Formfaktor.)

== Raspberry Pi ==

[[Raspberry Pi]] war erste und wir haben 4-5 RasPi Projekte:

* [[Raspberry Pi/Gehäuse]] von Thingiverse
* [[Raspberry Pi]] kontrolliert Arduinos ...
* [[Alex/Wspr/WsprryPi]] - Raspberry Pi WSPR transmitter
* [[RaspberryPi/boot_script]] - ACPI-like power button and LED

== OLinuxino Lime ==

Wir habe noch drei [[Lime]] projekten:

* [[Ubuntu on Lime]] -- bendet, Ubuntu läuft schön.
* [[Servo-control on Lime]] -- mann will anprobiere zu benutzen Raspberry Pi PWM Daemon mit Lime
* [[1-wire control on Lime]] -- zu lesen 1-wire (Dallas) Sensoren auf Lime

DevBoardBank

2014-02-27T22:55:18Z

Miga: Wechseln Spansion FM4 für Miga's STM32F4 welche geht mit ihm

Wir haben viele Entwicklungsbretten welche kann sein leihen für kurzfristige eksperimente:

* MSP 430 LaunchPad (heute in dem Bank)
* STM32F0 (heute in dem Bank)
* Spansion FM4 (heute in dem Bank)

Alles will sein in einige Box mit Nahme ''Dev Board Bank''.

Diese sind '''nicht für Verkauf'''!

Wann du brauchst eine, bitte schreiben deine Nahme in die Klammern, so ändere leute könnt wem zu frage!

Ubuntu on Lime

2014-02-23T08:40:48Z

Miga: /* Preparation of image on another system */

== Preparation of image on another system ==
[0.] Install gcc cross-compiler: ''apt-get install gcc-arm-noeabi''.
I had it from:

deb http://ppa.launchpad.net/terry.guo/gcc-arm-embedded/ubuntu raring main
deb-src http://ppa.launchpad.net/terry.guo/gcc-arm-embedded/ubuntu raring main

1. Made sunxi-boot and sunxi-kernel (with modules) in accord with '''Lime's tutorial for Debian''':

''https://olimex.wordpress.com/2013/12/13/building-debian-linux-image-for-a10-olinuxino-lime-with-kernel-3-4-67/''

The following steps 2 and 3 are performed on a *rootfs* image after mounting on a host system.

2. Downloaded armhf versions of packages missing for network, and put them to ''/root'' on boot image.

http://ports.ubuntu.com/ubuntu-ports/pool/main/b/busybox/busybox-static_1.21.0-1ubuntu1_armhf.deb
http://ports.ubuntu.com/ubuntu-ports/pool/main/n/net-tools/net-tools_1.60-25ubuntu1_armhf.deb
http://ports.ubuntu.com/ubuntu-ports/pool/main/b/busybox/udhcpc_1.21.0-1ubuntu1_armhf.deb

3. Configure serial '''almost''' in accord to:

''https://help.ubuntu.com/community/SerialConsoleHowto''

The only change is ''--autologin root'' parameter for getty.

cat - > etc/init/ttyS0.conf <<EOF
# ttyS0 - getty
#
# This service maintains a getty on ttyS0 from the point the system is
# started until it is shut down again.

start on stopped rc or RUNLEVEL=[12345]
stop on runlevel [!12345]

respawn
exec /sbin/getty --autologin root -L 115200 ttyS0 vt102
EOF

cat - > etc/event.d/ttyS0 <<EOF
# ttyS0 - getty
#
# This service maintains a getty on ttyS0 from the point the system is
# started until it is shut down again.

start on runlevel 1
start on runlevel 2
start on runlevel 3
start on runlevel 4
start on runlevel 5

stop on runlevel 0
stop on runlevel 6

respawn
exec /sbin/getty 115200 ttyS0
EOF

== After booting lime ==

4. After booting and logging through serial (''screen /dev/ttyUSB0 115200''):

dpkg -i *.deb

cat - > /etc/network/interfaces.d/eth0 <<EOF
auto eth0
iface eth0 inet dhcp
EOF

5. Uncomment universe and multiverse repositories and then apt-get update
and install whatever packages I need.

6. To have access to sunxi config tools, compile:

git clone https://github.com/linux-sunxi/sunxi-tools

7. [Optional:] to get Mali drivers:

git clone https://github.com/linux-sunxi/sunxi-mali.git && \
git submodule init && \
git submodule update

8. For GPIO:

echo 'gpio_sunxi' >> /etc/modules
modprobe gpio_sunxi

Ubuntu on Lime

2014-02-23T08:40:16Z

Miga: /* Preparation of image on another system */

== Preparation of image on another system ==
[0.] Install gcc cross-compiler: ''apt-get install gcc-arm-noeabi''.
I had it from:

''
deb http://ppa.launchpad.net/terry.guo/gcc-arm-embedded/ubuntu raring main
deb-src http://ppa.launchpad.net/terry.guo/gcc-arm-embedded/ubuntu raring main
''

1. Made sunxi-boot and sunxi-kernel (with modules) in accord with '''Lime's tutorial for Debian''':

''https://olimex.wordpress.com/2013/12/13/building-debian-linux-image-for-a10-olinuxino-lime-with-kernel-3-4-67/''

The following steps 2 and 3 are performed on a *rootfs* image after mounting on a host system.

2. Downloaded armhf versions of packages missing for network, and put them to ''/root'' on boot image.

http://ports.ubuntu.com/ubuntu-ports/pool/main/b/busybox/busybox-static_1.21.0-1ubuntu1_armhf.deb
http://ports.ubuntu.com/ubuntu-ports/pool/main/n/net-tools/net-tools_1.60-25ubuntu1_armhf.deb
http://ports.ubuntu.com/ubuntu-ports/pool/main/b/busybox/udhcpc_1.21.0-1ubuntu1_armhf.deb

3. Configure serial '''almost''' in accord to:

''https://help.ubuntu.com/community/SerialConsoleHowto''

The only change is ''--autologin root'' parameter for getty.

cat - > etc/init/ttyS0.conf <<EOF
# ttyS0 - getty
#
# This service maintains a getty on ttyS0 from the point the system is
# started until it is shut down again.

start on stopped rc or RUNLEVEL=[12345]
stop on runlevel [!12345]

respawn
exec /sbin/getty --autologin root -L 115200 ttyS0 vt102
EOF

cat - > etc/event.d/ttyS0 <<EOF
# ttyS0 - getty
#
# This service maintains a getty on ttyS0 from the point the system is
# started until it is shut down again.

start on runlevel 1
start on runlevel 2
start on runlevel 3
start on runlevel 4
start on runlevel 5

stop on runlevel 0
stop on runlevel 6

respawn
exec /sbin/getty 115200 ttyS0
EOF

== After booting lime ==

4. After booting and logging through serial (''screen /dev/ttyUSB0 115200''):

dpkg -i *.deb

cat - > /etc/network/interfaces.d/eth0 <<EOF
auto eth0
iface eth0 inet dhcp
EOF

5. Uncomment universe and multiverse repositories and then apt-get update
and install whatever packages I need.

6. To have access to sunxi config tools, compile:

git clone https://github.com/linux-sunxi/sunxi-tools

7. [Optional:] to get Mali drivers:

git clone https://github.com/linux-sunxi/sunxi-mali.git && \
git submodule init && \
git submodule update

8. For GPIO:

echo 'gpio_sunxi' >> /etc/modules
modprobe gpio_sunxi

Ubuntu on Lime

2014-02-22T23:26:06Z

Miga: /* Preparation of image on another system */

== Preparation of image on another system ==
1. Made sunxi-boot and sunxi-kernel (with modules) in accord with '''Lime's tutorial for Debian''':

''https://olimex.wordpress.com/2013/12/13/building-debian-linux-image-for-a10-olinuxino-lime-with-kernel-3-4-67/''

The following steps 2 and 3 are performed on a *rootfs* image after mounting on a host system.

2. Downloaded armhf versions of packages missing for network, and put them to ''/root'' on boot image.

http://ports.ubuntu.com/ubuntu-ports/pool/main/b/busybox/busybox-static_1.21.0-1ubuntu1_armhf.deb
http://ports.ubuntu.com/ubuntu-ports/pool/main/n/net-tools/net-tools_1.60-25ubuntu1_armhf.deb
http://ports.ubuntu.com/ubuntu-ports/pool/main/b/busybox/udhcpc_1.21.0-1ubuntu1_armhf.deb

3. Configure serial '''almost''' in accord to:

''https://help.ubuntu.com/community/SerialConsoleHowto''

The only change is ''--autologin root'' parameter for getty.

cat - > etc/init/ttyS0.conf <<EOF
# ttyS0 - getty
#
# This service maintains a getty on ttyS0 from the point the system is
# started until it is shut down again.

start on stopped rc or RUNLEVEL=[12345]
stop on runlevel [!12345]

respawn
exec /sbin/getty --autologin root -L 115200 ttyS0 vt102
EOF

cat - > etc/event.d/ttyS0 <<EOF
# ttyS0 - getty
#
# This service maintains a getty on ttyS0 from the point the system is
# started until it is shut down again.

start on runlevel 1
start on runlevel 2
start on runlevel 3
start on runlevel 4
start on runlevel 5

stop on runlevel 0
stop on runlevel 6

respawn
exec /sbin/getty 115200 ttyS0
EOF

== After booting lime ==

4. After booting and logging through serial (''screen /dev/ttyUSB0 115200''):

dpkg -i *.deb

cat - > /etc/network/interfaces.d/eth0 <<EOF
auto eth0
iface eth0 inet dhcp
EOF

5. Uncomment universe and multiverse repositories and then apt-get update
and install whatever packages I need.

6. To have access to sunxi config tools, compile:

git clone https://github.com/linux-sunxi/sunxi-tools

7. [Optional:] to get Mali drivers:

git clone https://github.com/linux-sunxi/sunxi-mali.git && \
git submodule init && \
git submodule update

8. For GPIO:

echo 'gpio_sunxi' >> /etc/modules
modprobe gpio_sunxi

Ubuntu on Lime

2014-02-22T23:25:17Z

Miga: Zusätz: besser struktur

== Preparation of image on another system ==
1. Made sunxi-boot and sunxi-kernel (with modules) in accord with Lime's tutorial for Debian:

''https://olimex.wordpress.com/2013/12/13/building-debian-linux-image-for-a10-olinuxino-lime-with-kernel-3-4-67/''

The following steps 2 and 3 are performed on a *rootfs* image after mounting on a host system.

2. Downloaded armhf versions of packages missing for network, and put them to ''/root'' on boot image.

http://ports.ubuntu.com/ubuntu-ports/pool/main/b/busybox/busybox-static_1.21.0-1ubuntu1_armhf.deb
http://ports.ubuntu.com/ubuntu-ports/pool/main/n/net-tools/net-tools_1.60-25ubuntu1_armhf.deb
http://ports.ubuntu.com/ubuntu-ports/pool/main/b/busybox/udhcpc_1.21.0-1ubuntu1_armhf.deb

3. Configure serial '''almost''' in accord to:

''https://help.ubuntu.com/community/SerialConsoleHowto''

The only change is ''--autologin root'' parameter for getty.

cat - > etc/init/ttyS0.conf <<EOF
# ttyS0 - getty
#
# This service maintains a getty on ttyS0 from the point the system is
# started until it is shut down again.

start on stopped rc or RUNLEVEL=[12345]
stop on runlevel [!12345]

respawn
exec /sbin/getty --autologin root -L 115200 ttyS0 vt102
EOF

cat - > etc/event.d/ttyS0 <<EOF
# ttyS0 - getty
#
# This service maintains a getty on ttyS0 from the point the system is
# started until it is shut down again.

start on runlevel 1
start on runlevel 2
start on runlevel 3
start on runlevel 4
start on runlevel 5

stop on runlevel 0
stop on runlevel 6

respawn
exec /sbin/getty 115200 ttyS0
EOF

== After booting lime ==

4. After booting and logging through serial (''screen /dev/ttyUSB0 115200''):

dpkg -i *.deb

cat - > /etc/network/interfaces.d/eth0 <<EOF
auto eth0
iface eth0 inet dhcp
EOF

5. Uncomment universe and multiverse repositories and then apt-get update
and install whatever packages I need.

6. To have access to sunxi config tools, compile:

git clone https://github.com/linux-sunxi/sunxi-tools

7. [Optional:] to get Mali drivers:

git clone https://github.com/linux-sunxi/sunxi-mali.git && \
git submodule init && \
git submodule update

8. For GPIO:

echo 'gpio_sunxi' >> /etc/modules
modprobe gpio_sunxi

Inventory/Assorted

2014-02-19T18:57:57Z

Miga: Zusätz: optocoupler

{{Inventory Table Header|Type}}
{{ii| | | | | tbd | photo=Nase_20110718_024.jpg}}
{{ii| | Polyfuse 1850mA, 30V | Polyfuse | | 0.32 | photo=polyfuse.jpg}}
{{ii| [[http://de.mouser.com/ProductDetail/Lite-On/LTV-817A/?qs=sGAEpiMZZMteimceiIVCBy3V3CW6WLqr4H9PmMX4VzM%3d LTV-817A]] | Optocoupler | Unsorted | 5 | 0.16 | }}
{{Inventory Table Footer}}
[[Category:Inventory]]

Inventory/Microcontrollers

2014-02-19T18:41:09Z

Miga: /* AVR */ Zusätz: ATmega 88A-PU

==AVR==
{{Inventory Table Header|Type}}
{{ii| {{ds|atmega16|ATMEGA16-16PU}} | | Box 4 | 3 | 3.65 EUR, {{Reichelt|article=45028}} | photo=Nase_20110717_042.jpg}}
{{ii| {{ds|atmega8|ATMEGA8L-8PU}} | | Box 4 | 0 | 2.20 EUR {{Reichelt|article=45025}} | photo=Nase_20110718_001.jpg}}
{{ii| {{ds|atmega88|ATMEGA88-20AU}} | | Box 4 | 4 | 2.95 EUR, {{Reichelt|article=68168}} | photo=Nase_20110729_001.jpg}}
{{ii| {{ds|atmega88|ATMEGA328-AU}} | | Box 4 | 3 | 2.27 EUR, {{Reichelt|article=68168}} | photo=Nase_20110729_001.jpg}}
{{ii| {{ds|atmega88|ATMEGA88-PU}} | | Box 4 | 2 | 1.83 EUR, {{Reichelt|article=68168}} | photo=Nase_20110718_001.jpg}}
{{ii| {{ds|at90s1200|AT90S1200-16PC}} | | Box 4 | 2 | tbd | photo=Nase_20110718_002.jpg}}
{{ii| {{ds|attiny2313|ATTINY2313-20PU}} | | Box 4 | 3 | tbd | photo=Nase_20110725_023.jpg}}
{{ii| {{ds|attiny1320|ATTINY13 20-SO}} | | Box 4 | 3 | tbd |}}
{{ii| {{ds|attiny45V-10SI|ATTINY45V-10SI}} | | Box 4 | 3 | tbd |}}
{{ii| {{ds|flora|ATMEGA328V-8PU}} on Lilypad | | Lilypad | 4 | 15e | photo=flora.jpg }}

{{Inventory Table Footer}}

==MSP430==
{{Inventory Table Header|Type}}
{{ii| {{ds|MSP430G2231}} | | Box 4 | 2 | tbd | photo=Nase_20110718_003.jpg}}
{{ii| {{ds|MSP430G2201}} | | Box 4 | 3 | tbd | photo=Nase_20110718_004.jpg}}
{{Inventory Table Footer}}

==PIC==
{{Inventory Table Header|Type}}
{{ii| {{ds|PIC16F877}} | | Box 4 | 1 | tbd | photo=Nase_20110718_005.jpg}}
{{ii| {{ds|PIC16F84}} | | Box 4 | 3 | tbd | photo=Nase_20110718_006.jpg}}
{{ii| {{ds|PIC32MX}} | | Box 4 | 3 | tbd | photo=PIC32MX.jpg}}
{{Inventory Table Footer}}

==8051==
{{Inventory Table Header|Type}}
{{ii| {{ds|C8051F330}} | | Box 4 | 2 | tbd | photo=Nase_20110718_014.jpg}}
{{Inventory Table Footer}}

[[Category:Inventory]]

Inventory/Microcontrollers

2014-02-19T18:38:35Z

Miga: /* AVR */ Zusätz: ATmega 328-AU

==AVR==
{{Inventory Table Header|Type}}
{{ii| {{ds|atmega16|ATMEGA16-16PU}} | | Box 4 | 3 | 3.65 EUR, {{Reichelt|article=45028}} | photo=Nase_20110717_042.jpg}}
{{ii| {{ds|atmega8|ATMEGA8L-8PU}} | | Box 4 | 0 | 2.20 EUR {{Reichelt|article=45025}} | photo=Nase_20110718_001.jpg}}
{{ii| {{ds|atmega88|ATMEGA88-20AU}} | | Box 4 | 4 | 2.95 EUR, {{Reichelt|article=68168}} | photo=Nase_20110729_001.jpg}}
{{ii| {{ds|atmega88|ATMEGA328-AU}} | | Box 4 | 4 | 2.27 EUR, {{Reichelt|article=68168}} | photo=Nase_20110729_001.jpg}}
{{ii| {{ds|at90s1200|AT90S1200-16PC}} | | Box 4 | 2 | tbd | photo=Nase_20110718_002.jpg}}
{{ii| {{ds|attiny2313|ATTINY2313-20PU}} | | Box 4 | 3 | tbd | photo=Nase_20110725_023.jpg}}
{{ii| {{ds|attiny1320|ATTINY13 20-SO}} | | Box 4 | 3 | tbd |}}
{{ii| {{ds|attiny45V-10SI|ATTINY45V-10SI}} | | Box 4 | 3 | tbd |}}
{{ii| {{ds|flora|ATMEGA328V-8PU}} on Lilypad | | Lilypad | 4 | 15e | photo=flora.jpg }}

{{Inventory Table Footer}}

==MSP430==
{{Inventory Table Header|Type}}
{{ii| {{ds|MSP430G2231}} | | Box 4 | 2 | tbd | photo=Nase_20110718_003.jpg}}
{{ii| {{ds|MSP430G2201}} | | Box 4 | 3 | tbd | photo=Nase_20110718_004.jpg}}
{{Inventory Table Footer}}

==PIC==
{{Inventory Table Header|Type}}
{{ii| {{ds|PIC16F877}} | | Box 4 | 1 | tbd | photo=Nase_20110718_005.jpg}}
{{ii| {{ds|PIC16F84}} | | Box 4 | 3 | tbd | photo=Nase_20110718_006.jpg}}
{{ii| {{ds|PIC32MX}} | | Box 4 | 3 | tbd | photo=PIC32MX.jpg}}
{{Inventory Table Footer}}

==8051==
{{Inventory Table Header|Type}}
{{ii| {{ds|C8051F330}} | | Box 4 | 2 | tbd | photo=Nase_20110718_014.jpg}}
{{Inventory Table Footer}}

[[Category:Inventory]]

DevBoardBank

2014-02-19T09:37:03Z

Miga: /* Entwicklungsbrett Bank */

Wir haben viele Entwicklungsbretten welche kann sein leihen für kurzfristige eksperimente:

* MSP 430 LaunchPad (heute in dem Bank)
* STM32F0 (frage Miga)
* STM32F4 mit Stromnutzungmesser, Kiloproben pro Sekunde (frage Miga)

Alles will sein in einige Box mit Nahme ''Dev Board Bank''.

Diese sind '''nicht für Verkauf'''!

Wann du brauchst eine, bitte schreiben deine Nahme in die Klammern, so ändere leute könnt wem zu frage!

DevBoardBank

2014-02-19T09:36:49Z

Miga: /* Entwicklungsbrett Bank */ Anfäng

= Entwicklungsbrett Bank =

Wir haben viele Entwicklungsbretten welche kann sein leihen für kurzfristige eksperimente:

* MSP 430 LaunchPad (heute in dem Bank)
* STM32F0 (frage Miga)
* STM32F4 mit Stromnutzungmesser, Kiloproben pro Sekunde (frage Miga)

Alles will sein in einige Box mit Nahme ''Dev Board Bank''.

Diese sind '''nicht für Verkauf'''!

Wann du brauchst eine, bitte schreiben deine Nahme in die Klammern, so ändere leute könnt wem zu frage!

DevBoardBank

2014-02-19T09:35:07Z

Miga: Anfäng

= Entwicklungsbrett Bank =

Wir haben viele Entwicklungsbretten welche kann sein leihen für kurzfristige eksperimente:

* MSP 430 LaunchPad (heute in dem Bank)
* STM32F0 (frage Miga)
* STM32F4 mit Stromnutzungmesser, Kiloproben pro Sekunde (frage Miga)

Alles will sein in einige Box mit Nahme "Dev Board Bank".

*Diese sind nicht für Verkauf*!

Wann du brauchst eine, bitte schreiben deine Nahme in die Klammern, so ändere leute könnt wem zu frage!

Hauptseite

2014-02-19T09:29:02Z

Miga: /* Projekte */ Zusätz DevBoardBank

__NOTOC__

{{Template:Status}}

Dies ist die Seite des '''CCC Göttingen'''. Wir sind der Göttinger Erfa-Kreis des [http://www.ccc.de/ '''Chaos Computer Club'''] und unterhalten den Hackerspace [[Noklab|'''Noklab''']].

Unser [http://de.wikipedia.org/wiki/Hackerspace Hackerspace] ist fast jeden Tag bevölkert. Unter [http://hackerspaces.me/wall hackerspaces.me] oder in unserem [[:Communication | MUC]] kann in Erfahrung gebracht werden, ob das NOKLAB gerade offen ist. Neugierige können gerne jederzeit vorbeischauen, um uns kennenzulernen. Außerhalb des [[OpenChaos]] kann es jedoch passieren, dass wir sehr beschäftigt sind. Im Zweifelsfall kannst Du dich gerne im [[:Communication | MUC]] oder per [[:Communication | Mail]] ankündigen, wenn Du uns besuchen möchtest!

<center>'''[[Mitglied werden]]!'''</center>

[[Datei:Alex lotta 20130729.BQDBTzECIAEgNSC.jpg | 550px]]

=Veranstaltungen=

Jeden zweiten Dienstag um 20 Uhr ist im [[Noklab]] ein explizit öffentliches Treffen, das '''[[OpenChaos]]'''. Jeder der uns kennenlernen möchte, ist eingeladen, an diesem Termin unverbindlich und spontan vorbeizuschauen.
Es finden Diskussionen zu aktuellen Themen und den laufenden Projekten statt und zudem werden unregelmäßig Vorträge gehalten, die '''[[Lightning Talks]]'''.




{{Template:Termine}}


''Auch in anderen Städten lohnt es sich bei den jeweiligen [http://ccc.de/de/regional Chaostreffs, Erfakreise], [http://hackerspaces.org/wiki/ Hackerspaces] und FabLabs nach aktuellen Terminen zu schauen. Für Infos über größere Events besucht events.ccc.de.''

[[Vergangenes|Vergangene Events]]

= Projekte =
{|class="wikitable"
!colspan="3"|Aktive Projekte
|-
|[[CNC Laser]] || Erste Experimente mit diversen Laserdioden. Endziel ist ein CNC Laser Cutter für Papier, Aufkleber, Platinen, Holz und anderes.|| Mitarbeit erwünscht
|-
|[[Trägheitsnavigation]] || Wie gut kann man einen Posenverlauf über Accelerometer und Gyroskope nachvollziehen? (Pose = Orientierung + Position) || Ergebnis: Sensoren viel zu ungenau, um damit navigieren zu können
|-
|[[3D-Drucker]] || 3-D drucken und am Drucker basteln || Mitarbeit erwünscht
|-
|[[Datei:Alex lotta 01 .IMG 7726.JPG|150px]]||[[pic32|PIC32 Experimente]]: Elektronik lernen und Microkontroller programmieren mit und ohne Pinguinoboard. Flauschballelektronik und andere Spielerein || Hier könnt Ihr gerne mitmachen!
|-
|[[BeamMeUp]] || Stabile Aufhängung für unseren Monsterbeamer || Mitarbeit erwünscht
|-
|[[Norbot]] || XMPP/Jabber Bot || Pausiert
|-
|[[Modlight | Moodlights]] || [[Noklab]] Raumbeleuchtung || Gehäuse fehlen, Software fehlt, etc. Mitarbeit erwünscht
|-
|[[Datei:Wall.jpg|150px]]|| NOKLAB [[Wandbemalung]] mit Features || Mitkünstler* gesucht; Motivideen bitte auf der Wikiseite eintragen
|-
|[http://quantenbotanik.de/flauschballelektronik/ Flauschball] || Elektronik für den Flauschball || Ideen gern gehört, später Mithilfe bei PIC32 Programmierung MIPS Assembler und/oder C
|-
|[[Logo]] || Entwicklung von Logos für NOKLAB und ccc_goe || Anstross/Ideen/Eigene Arbeiten erwünscht
|-
| [[Hackercocktail]] || Liste lustiger Cocktails zum Coden || Cocktailparty gesucht
|-
|[[Inventory|E-Lager]] || Lager an Elektronikbauteilen für den täglichen Gebrauch || immer korrigierbar; gerne aktualisieren und fehlende Fotos hochladen
|-
|[[SpaceAPI]] || Space Status per Web API ||
|-
|[[SDRSpiel]] || Software-Defined Radio - FM, AM dekodierung von publik Spektrumbanden || mitarbeiter erwünscht, am besten mit Amateur Radio Lizenz
|-
|[[BioHacking]] || Haskell für Bioinformatik und spaß || mitarbeiter erwünscht
|-
|[[LinuxFrüchten]] || RasPi und Lime projects|| dokumentierung erwünscht
|-
|}

{|class="wikitable"
!colspan="2"|Abgeschlossene Projekte
|-
|[[Datei:AlexN900 01 20120423 003.jpg|150px]]||[[Pixelflut]] Netzwerk+Pixel=Kunst
|-
|[[Datei:Spacemaster-7000.jpg|150px]]||[[Spacemaster_7000]]: Spacestatusmanagementdevice
|-
|[[Schliesssystem]] || Automatisches Türöffnungssystem
|-
|[[Datei:Nase 20110731 002.jpg|150px]] ||[[No Apple Sign]]: Statusanzeige, ob Applegeräte im NOKLAB sind
|-
|[[Datei:Tvbgone.png|150px]]|| SMD-Bausatz für [[TVBGone/en|TVBGone]]
|-
|[[Datei:Das bild1.jpg|150px]] ||[[Bweamer]]: schwarz/weiß Beamer mit LED
|-
|[[Datei:Nase 20090118 001.jpg|150px]]||[[Kuschelig]]: Heizungssteuerung per XMPP
|-
|[[USB Keyboard]] ||
|-
|[[2wiki.sh]] || Fotoupload ins Mediawiki per N900 (TODO: port aufs N9)
|-
|[[Marble Storage Ring]] || Murmelbahn, die [http://www.youtube.com/watch?v=ljPB0DanK74 läuft und läuft und ...]
|-
|[[Sprachchat]] || Mumble
|-
|[[Brainfuck-Ook-Compiler]] ||
|-
|[[OZ960-hack]] || Reparatur der Hintergrundbeleuchtung eines Samsung X10 Notebooks
|-
|}

Hardwarestuff zum Verbasteln für neue Projekte findet ihr [[Rumflieghardware|hier]].

Development boards/evaluation boards für leihen findet ihr [[DevBoardBank|hier]].

[[:Category:Bausaetze|Bausätze]]

[[:Category:Projekte|Projektarchiv]]

= Kontakt =
[[File:Anfahrt.png|thumb|300px|roter Marker: [[Noklab]] (Neustadt 7, 37073 Göttingen); türkiser Marker: Bahnhof Göttingen]]
{{:Communication}}

===Wegbeschreibung===
Zum Noklab: Vom Bahnhof aus die Goetheallee Richtung Innenstadt laufen und die zweite Strasse (Neustadt) rechts abbliegen.

Parken: In der Strasse kann nach 19 Uhr unter der Woche und nach 17 Uhr am Samstag kostenlos geparkt werden.

LinuxFrüchten

2014-02-19T09:14:58Z

Miga: /* LinuxFrüchten */ Zusätz: 86Duino

=LinuxFrüchten=

Viele projekten benutzt [[Raspberry Pi]] oder OLinuxino [[Lime]] für Linux-basierte kontrolle.

Hier ist die anfang für generele dokumentierung für Linux-auf-Arm, Linux GPIO etc. sachen in CCC.

Anderes billige Linux-basierte kontrollern:
# [http://www.watterott.com/de/86Duino-EduCake 86Duino] ist x86-kompatibel mikrokontroller set mit 128MB RAM. (47e mit Brettchen, oder 36e in Arduino-Formfaktor.)

== Raspberry Pi ==

[[Raspberry Pi]] war erste und wir haben 4-5 RasPi projekte:

* [[Raspberry Pi/Gehäuse]] von Thingiverse
* [[Raspberry Pi]] kontrolliert Arduinos ...
* [[Alex/Wspr/WsprryPi]] - Raspberry Pi WSPR transmitter
* [[RaspberryPi/boot_script]] - ACPI-like power button and LED

== OLinuxino Lime ==

Wir habe noch drei [[Lime]] projekten:

* [[Ubuntu on Lime]] -- bendet, Ubuntu läuft schön.
* [[Servo-control on Lime]] -- mann will anprobiere zu benutzen Raspberry Pi PWM daemon mit Lime
* [[1-wire control on Lime]] -- zu lesen 1-wire (Dallas) sensoren auf Lime

Inventory/Meta/Ordering

2014-02-18T21:44:25Z

Miga: Zusätz: silver Dräht

This page contains the list of parts we may order next:
__FORCETOC__
{| class="wikitable"
! Part
! Amount
! Where
|-
| 2x5 Female Header (IDC) || || {{reichelt|article=14571}}
|-
| USB B || ||
|-
| Optokoppler, zB PC817 || 10 ||
|-
| Streifenrasterplatinen || 5 ||
|-
| DIL-8-300 Socket || 10 || ?
|-
| DIL-28-300 Socket || 10 || ?
|-
| Crystal 8MHz || 10 || {{reichelt|article=13723}}
|-
| Crystal 16MHz || 10 || {{reichelt|article=13686}}
|-
| Silber Draht || 1? || {{reichelt|article=18069}}
|-
|}

== Wishlist ==
Everything that hasn't been in the lab up until now but you really want it:
{| class="wikitable"
! Part
! Amount
! Where
|-
|
! Polyfuse 800mA (e.g. USB 2.0 polyfuse)
! 5-10
! ?
|-
|
! Polyfuse 50mA (e.g. ATmega GPIO polyfuse)
! 5-10
! ?
|-
|}

== Immer mal wieder ==
{| class="wikitable"
! Part
! Amount
! Where
|-
| 1k metal film resistors, leaded || >= 1000 || 1* {{digikey|keywords=S1KCATR-ND}} or 1000 * {{reichelt|article=11403}}
|-
| {{ds|FT232R}} USB-UART Transceiver, SSOP-28 || Notiz: wir haben noch 4x USB-UART gerät von China [https://cccgoe.de/wiki/Inventory/ICs#Transceiver billiger] wie Reichelt! || {{reichelt|article=64399}}
|-
|{{ii| 2x5 Female Header (IDC) || || {{reichelt|article=14571}}
|}

Datei:M-m-cobbler.jpg

2014-02-18T20:32:48Z

Miga:

Inventory/Mechanical Devices

2014-02-18T20:32:26Z

Miga: /* Connectors, Screw Terminals and Headers */ m-m cobbler

==Switches==
{{Inventory Table Header|Type}}
{{ii| Quad SMD DIP Switch | SO-DIP8 | Mechanisches | 42 | 0.25 EUR ([[Benutzer:Marvin]]), [http://de.farnell.com/apem/ikn0403000/dip-schalter/dp/1703842] | photo=20110705_001.jpg}}
{{ii| 12x DIP switch | | Box 2 | 3 | 0.30 EUR? | photo=Nase_20110717_028.jpg}}
{{ii| SMT Switch | | Box 2 | ~15 | 0.05 EUR | photo=Nase_20110725_034.jpg}}
{{ii| Switch | | Box 2 | 2 | 0.30 EUR | photo=Nase_20110725_033.jpg}}
{{Inventory Table Footer}}

==Pushbuttons==
{{Inventory Table Header|Type}}
{{ii| Pushbutton | | Box 2 | ~30 | 0.05 EUR | photo=Nase_20110717_025.jpg}}
{{ii| Pushbutton | | Box 2 | 0 | 0.30 EUR | photo=Nase_20110717_027.jpg}}
{{ii| Pushbutton | | Box 2 | 0 | 0.15 EUR | photo=Nase_20110725_029.jpg}}
{{ii| Pushbutton | | Box 2 | ~20 | 0.05 EUR | photo=Nase_20110725_031.jpg}}
{{ii| Pushbutton | | Box 2 | 1 | 0.15 EUR | photo=Nase_20110725_032.jpg}}
{{ii| Pushbutton | used and really crappy| Box 2 | 6 | 0.05 EUR | photo=Nase_20110725_036.jpg}}
{{ii| Fabric 5xbutton | | Mechanical devices | 1 | 16.81 EUR | photo=button_pad.jpg}}
{{Inventory Table Footer}}

==Joystick==
{{Inventory Table Header|Type}}
{{ii| 4-way joystick | | Box 2 | 1 | 2 EUR | photo=Nase_20110725_042.jpg}}
{{Inventory Table Footer}}

==Encoders==
{{Inventory Table Header|Type}}
{{ii| ALPS EC11 18-step without button | | Box 2 | 4 | 1 EUR | photo=Nase_20110725_035.jpg}}
{{Inventory Table Footer}}

==Relays==
{{Inventory Table Header|Type}}
{{ii| {{ds|JSM1|JSM1a-9V-5}} | SPST Relay, V_{coil}{{eq}} 9 V | Mechanisches | 10 | 0.50 | photo=Nase_20110717_032.jpg}}
{{ii| {{ds|G6S|G6S-2G-Y}} | DPDT Relay, V_{coil}{{eq}}24 V | Mechanisches | 28 | 0.30 | photo=Nase_20110717_033.jpg}}
{{ii| | SPDT Relay, V_{coil}{{eq}}12 V | Mechanisches | 7 | 0.40 | photo=Nase_20110725_077.jpg}}
{{Inventory Table Footer}}

==Connectors, Screw Terminals and Headers==
{{Inventory Table Header|Type}}
{{ii| Lustre Terminal | black | Mechanisches | 47 | tbd | photo=20110705_002.jpg}}
{{ii| Straight Pin Header | RM 100 | Pin Header Straight M-M | > 1000 | 0.005 EUR / pin | photo=20110705_003.jpg}}
{{ii| Pin Header 90 degrees | RM 100 | Pin Headers 90 | > 200 | 0.005 EUR / pin | photo=20110705_005.jpg}}
{{ii| Female Pin Header | RM 100 | Pin Headers M-F | 255 | 0.01 EUR / pin ({{csd|014-B140G}}) | photo=20110705_006.jpg}}
{{ii| Jumper | | Mechanisches | ~20 | 0.01 EUR }}
{{ii| 2x3 Shrouded Header | RM 100 | Mechanisches | 2 | | photo=Nase_20111013_025.jpg}}
{{ii| 2x3 Female Header (IDC) | RM 100 | Mechanisches | 2 | | photo=Nase_20111013_023.jpg}}
{{ii| 2x5 Shrouded Header | RM 100 | Mechanisches | ~23 | 0.08 EUR ({{reichelt|article=22816}}) | photo=20110705_007.jpg}}
{{ii| 2x5 Female Header (IDC) | RM 100 | Mechanisches | 20 | 0.08 EUR ({{reichelt|article=14571}}) | photo=20110705_008.jpg}}
{{ii| 2x8 Shrouded Header | RM 100 | Mechanisches | 2 | | photo=Nase_20111013_021.jpg}}
{{ii| 2x8 Female Header (IDC) | RM 100 | Mechanisches | 2 | | photo=Nase_20111013_020.jpg}}
{{ii| 2x20 Shrouded Header | RM 100 | Mechanisches | 2 | | photo=Nase_20111013_019.jpg}}
{{ii| 2x20 Female Header (IDC) | RM 100 | Mechanisches | 1 | 0.17 EUR | photo=Nase_20111013_018.jpg}}
{{ii| 5 mm input lab jack | | Mechanisches | 5 | 0.21 EUR | photo=20110705_011.jpg}}
{{ii| 5 mm lab jack | | Mechanisches | 2 | 0.15 EUR | photo=20110705_009.jpg}}
{{ii| Barrel Connector female | | Mechanisches | 0 | 0.21 EUR | photo=Nase_20110725_063.jpg}}
{{ii| Barrel Connector male | | Mechanisches | 0 | 0.30 EUR | photo=Nase_20110725_064.jpg}}
{{ii| 5mm Screw Terminal | | Mechanisches | 4 | 0.10 EUR | photo=Nase_20110725_043.jpg}}
{{ii| USB B | THT | Mechanisches | 1 | 0.20 EUR (?) | photo=Nase_20110725_061.jpg}}
{{ii| USB A | SMD | Mechanisches | 41 | tbd | photo=usb_a_smd-1.jpg}}
{{ii| Mini-USB B | THT | Mechanisches | 1 | 0.30 EUR (?) | photo=Nase_20110828_005.jpg}}
{{ii| Mini-USB B | SMD | Mechanisches | 1 | tbd | photo=Nase_20110828_005.jpg}}
{{ii| Mikro-USB B | SMD | Mechanisches | 5 | 0.30 EUR (?) | photo=Nase_20110828_012.jpg}}
{{ii| D-Sub 25-pin female | | Mechanisches | 2 | tbd | photo=Nase_20110725_073.jpg}}
{{ii| D-Sub 25-pin male | | Mechanisches | 1 | tbd | photo=Nase_20110725_067.jpg}}
{{ii| D-Sub 9-pin female pcb | | Mechanisches | 2 | tbd | photo=Nase_20110725_065.jpg}}
{{ii| D-Sub 9-pin female solder | | Mechanisches | 1 | tbd | photo=Nase_20110725_066.jpg}}
{{ii| 20-cable female cobbler | | Mechanisches | 3 | 1.30 EUR | photo=Nase_20140115_001.jpg}}
{{ii| 20-cable male cobbler | | Mechanisches | 3 | 1.19 EUR | photo=m-m-cobbler.jpg}}
{{Inventory Table Footer}}

==Fuse holder==
{{Inventory Table Header|Type}}
{{ii| Fuse holder | | Mechanisches | 3 | tbd | photo=Nase_20110725_062.jpg}}
{{Inventory Table Footer}}

==Screws==
{{Inventory Table Header|Type}}
{{ii| M3 x 6 mm | Schlitz | Screws | > 30 | 0.01 EUR | photo=20110705_012.jpg}}
{{ii| M4 x 40 mm | Schlitz | Screws | > 30 | 0.03 EUR | photo=20110705_013.jpg}}
{{ii| M4 x 50 mm | Schlitz | Screws | > 30 | 0.03 EUR | photo=20110705_014.jpg}}
{{ii| Nut M3 | | Screws | 0 | tbd | photo=Nase_20110725_051.jpg}}
{{Inventory Table Footer}}

==Sockets==
{{Inventory Table Header|Type}}
{{ii| ZIF Socket (28 pins) | | Mechanisches | 2 | 0.50 EUR | photo=Nase_20110717_001.jpg}}
{{ii| ZIF Socket (32 pins) | | Mechanisches | 2 | 0.50 EUR | photo=Nase_20110717_002.jpg}}
{{ii| DIL-8-300 Socket | | Box 3 | 2 | 0.10 | photo=Nase_20110717_034.jpg}}
{{ii| DIL-16-300 Socket | | Box 3 | ~10 | 0.10 }}
{{ii| DIL-18-300 Socket | | Box 3 | 2 | 0.10 | photo=Nase_20110717_035.jpg}}
{{ii| DIL-28-300 Socket | | Box 3 | 0 | 0.10 | photo=Nase_20110717_036.jpg}}
{{ii| DIL-40-600 Socket | | Box 3 | 0 | 0.10 | photo=Nase_20110717_037.jpg}}
{{Inventory Table Footer}}

==Motors==
{{Inventory Table Header|Type}}
{{ii| servo motor 'micro servo 9g' (3D Model: [[Micro Servo 9G]]) | | Mechanisches | 4 | 1.88 EUR | photo=Nase_20110717_003.jpg}}

{{ii| servo motor 'RC Servo 36g 1019F01' | | Mechanisches | 2 | 2.75 EUR | photo=servo_35g.jpg}}

{{ii| Paper transport thing with switch and motor
| MBL1314A | Mechanisches | 3 | tbd | photo=Mbl1314A.jpg}}
{{Inventory Table Footer}}

==Magnets==
{{Inventory Table Header|Type}}
{{ii| several types of pull magnets| | Mechanisches | 2 | tbd | photo=Nase_20110717_005.jpg}}
{{Inventory Table Footer}}

==Breadboards==
{{Inventory Table Header|Type}}
{{ii| breadboard| | Perfboard | 5 | 2 EUR | photo=Nase_20110816_006.jpg}}
{{Inventory Table Footer}}

==Heat Sinks==
{{Inventory Table Header|Type}}
{{ii| Heat Sink| | Mechanisches | 1 | 2 EUR | photo=Nase_20110828_014.jpg}}
{{ii| Heat Sink| | Mechanisches | 1 | 3 EUR | photo=Nase_20110828_015.jpg}}
{{ii| Heat Sink| | Mechanisches | 1 | 2 EUR | photo=P1080792 half.jpg}}
{{ii| Heat Sink with fan| | Mechanisches | 1 | 5 EUR | photo=P1080795 half.jpg}}
{{Inventory Table Footer}}

==Battery holder==
{{Inventory Table Header|Type}}
{{ii| CR battery holder | | Lilypad | 5 | 0.84 EUR | photo=cr_battery_holder.jpg}}
{{ii| Lilypad 1xAAA battery holder | | Lilypad | 2 | 10.92 EUR | photo=lilypad_battery_holder.jpg}}
[[Category:Inventory]]
{{Inventory Table Footer}}

Vorlage:Termine

2014-02-18T04:50:24Z

Miga: Alte termine storniert

Inventory/Meta/Ordering

2014-02-14T23:56:00Z

Miga: Zusátz: quartze, socketen

This page contains the list of parts we may order next:
__FORCETOC__
{| class="wikitable"
! Part
! Amount
! Where
|-
| 2x5 Female Header (IDC) || || {{reichelt|article=14571}}
|-
| USB B || ||
|-
| Optokoppler, zB PC817 || 10 ||
|-
| Streifenrasterplatinen || 5 ||
|-
| DIL-8-300 Socket || 10 || ?
|-
| DIL-28-300 Socket || 10 || ?
|-
| Crystal 8MHz || 10 || ?
|-
| Crystal 16MHz || 10 || ?
|-
|}

== Wishlist ==
Everything that hasn't been in the lab up until now but you really want it:
{| class="wikitable"
! Part
! Amount
! Where
|-
|
! Polyfuse 800mA (e.g. USB 2.0 polyfuse)
! 5-10
! ?
|-
|
! Polyfuse 50mA (e.g. ATmega GPIO polyfuse)
! 5-10
! ?
|-
|}

== Immer mal wieder ==
{| class="wikitable"
! Part
! Amount
! Where
|-
| 1k metal film resistors, leaded || >= 1000 || 1* {{digikey|keywords=S1KCATR-ND}} or 1000 * {{reichelt|article=11403}}
|-
| {{ds|FT232R}} USB-UART Transceiver, SSOP-28 || Notiz: wir haben noch 4x USB-UART gerät von China [https://cccgoe.de/wiki/Inventory/ICs#Transceiver billiger] wie Reichelt! || {{reichelt|article=64399}}
|-
|{{ii| 2x5 Female Header (IDC) || || {{reichelt|article=14571}}
|}

Inventory/Meta/Ordering

2014-02-14T23:43:14Z

Miga:

This page contains the list of parts we may order next:
__FORCETOC__
{| class="wikitable"
! Part
! Amount
! Where
|-
| 2x5 Female Header (IDC) || || {{reichelt|article=14571}}
|-
| USB B || ||
|-
| Optokoppler, zB PC817 || 10 ||
|-
| Streifenrasterplatinen || 5 ||
|-
| DIL-8-300 Socket || 10 || ?
|-
| DIL-28-300 Socket || 10 || ?
|-
|}

== Wishlist ==
Everything that hasn't been in the lab up until now but you really want it:
{| class="wikitable"
! Part
! Amount
! Where
|-
|
! Polyfuse 800mA (e.g. USB 2.0 polyfuse)
! 5-10
! ?
|-
|
! Polyfuse 50mA (e.g. ATmega GPIO polyfuse)
! 5-10
! ?
|-
|}

== Immer mal wieder ==
{| class="wikitable"
! Part
! Amount
! Where
|-
| 1k metal film resistors, leaded || >= 1000 || 1* {{digikey|keywords=S1KCATR-ND}} or 1000 * {{reichelt|article=11403}}
|-
| {{ds|FT232R}} USB-UART Transceiver, SSOP-28 || Notiz: wir haben noch 4x USB-UART gerät von China [https://cccgoe.de/wiki/Inventory/ICs#Transceiver billiger] wie Reichelt! || {{reichelt|article=64399}}
|-
|{{ii| 2x5 Female Header (IDC) || || {{reichelt|article=14571}}
|}

Inventory/Meta/Ordering

2014-02-14T23:42:14Z

Miga:

This page contains the list of parts we may order next:
__FORCETOC__
{| class="wikitable"
! Part
! Amount
! Where
|-
| 2x5 Female Header (IDC) || || {{reichelt|article=14571}}
|-
| USB B || ||
|-
| Optokoppler, zB PC817 || 10 ||
|-
| Streifenrasterplatinen || 5 ||
|-
! DIL-8-300 Socket
! 10
! ?
|-
|
! DIL-28-300 Socket
! 10
! ?
|-
|}

== Wishlist ==
Everything that hasn't been in the lab up until now but you really want it:
{| class="wikitable"
! Part
! Amount
! Where
|-
|
! Polyfuse 800mA (e.g. USB 2.0 polyfuse)
! 5-10
! ?
|-
|
! Polyfuse 50mA (e.g. ATmega GPIO polyfuse)
! 5-10
! ?
|-
|}

== Immer mal wieder ==
{| class="wikitable"
! Part
! Amount
! Where
|-
| 1k metal film resistors, leaded || >= 1000 || 1* {{digikey|keywords=S1KCATR-ND}} or 1000 * {{reichelt|article=11403}}
|-
| {{ds|FT232R}} USB-UART Transceiver, SSOP-28 || Notiz: wir haben noch 4x USB-UART gerät von China [https://cccgoe.de/wiki/Inventory/ICs#Transceiver billiger] wie Reichelt! || {{reichelt|article=64399}}
|-
|{{ii| 2x5 Female Header (IDC) || || {{reichelt|article=14571}}
|}

Inventory/Meta/Ordering

2014-02-14T23:41:56Z

Miga: /* Wishlist */

Inventory/Meta/Ordering

2014-02-14T23:41:21Z

Miga: /* Wishlist */

Inventory/Mechanical Devices

2014-02-14T23:39:49Z

Miga: /* Sockets */

==Switches==
{{Inventory Table Header|Type}}
{{ii| Quad SMD DIP Switch | SO-DIP8 | Mechanisches | 42 | 0.25 EUR ([[Benutzer:Marvin]]), [http://de.farnell.com/apem/ikn0403000/dip-schalter/dp/1703842] | photo=20110705_001.jpg}}
{{ii| 12x DIP switch | | Box 2 | 3 | 0.30 EUR? | photo=Nase_20110717_028.jpg}}
{{ii| SMT Switch | | Box 2 | ~15 | 0.05 EUR | photo=Nase_20110725_034.jpg}}
{{ii| Switch | | Box 2 | 2 | 0.30 EUR | photo=Nase_20110725_033.jpg}}
{{Inventory Table Footer}}

==Pushbuttons==
{{Inventory Table Header|Type}}
{{ii| Pushbutton | | Box 2 | ~30 | 0.05 EUR | photo=Nase_20110717_025.jpg}}
{{ii| Pushbutton | | Box 2 | 0 | 0.30 EUR | photo=Nase_20110717_027.jpg}}
{{ii| Pushbutton | | Box 2 | 0 | 0.15 EUR | photo=Nase_20110725_029.jpg}}
{{ii| Pushbutton | | Box 2 | ~20 | 0.05 EUR | photo=Nase_20110725_031.jpg}}
{{ii| Pushbutton | | Box 2 | 1 | 0.15 EUR | photo=Nase_20110725_032.jpg}}
{{ii| Pushbutton | used and really crappy| Box 2 | 6 | 0.05 EUR | photo=Nase_20110725_036.jpg}}
{{ii| Fabric 5xbutton | | Mechanical devices | 1 | 16.81 EUR | photo=button_pad.jpg}}
{{Inventory Table Footer}}

==Joystick==
{{Inventory Table Header|Type}}
{{ii| 4-way joystick | | Box 2 | 1 | 2 EUR | photo=Nase_20110725_042.jpg}}
{{Inventory Table Footer}}

==Encoders==
{{Inventory Table Header|Type}}
{{ii| ALPS EC11 18-step without button | | Box 2 | 4 | 1 EUR | photo=Nase_20110725_035.jpg}}
{{Inventory Table Footer}}

==Relays==
{{Inventory Table Header|Type}}
{{ii| {{ds|JSM1|JSM1a-9V-5}} | SPST Relay, V_{coil}{{eq}} 9 V | Mechanisches | 10 | 0.50 | photo=Nase_20110717_032.jpg}}
{{ii| {{ds|G6S|G6S-2G-Y}} | DPDT Relay, V_{coil}{{eq}}24 V | Mechanisches | 28 | 0.30 | photo=Nase_20110717_033.jpg}}
{{ii| | SPDT Relay, V_{coil}{{eq}}12 V | Mechanisches | 7 | 0.40 | photo=Nase_20110725_077.jpg}}
{{Inventory Table Footer}}

==Connectors, Screw Terminals and Headers==
{{Inventory Table Header|Type}}
{{ii| Lustre Terminal | black | Mechanisches | 47 | tbd | photo=20110705_002.jpg}}
{{ii| Straight Pin Header | RM 100 | Pin Header Straight M-M | > 1000 | 0.005 EUR / pin | photo=20110705_003.jpg}}
{{ii| Pin Header 90 degrees | RM 100 | Pin Headers 90 | > 200 | 0.005 EUR / pin | photo=20110705_005.jpg}}
{{ii| Female Pin Header | RM 100 | Pin Headers M-F | 255 | 0.01 EUR / pin ({{csd|014-B140G}}) | photo=20110705_006.jpg}}
{{ii| Jumper | | Mechanisches | ~20 | 0.01 EUR }}
{{ii| 2x3 Shrouded Header | RM 100 | Mechanisches | 2 | | photo=Nase_20111013_025.jpg}}
{{ii| 2x3 Female Header (IDC) | RM 100 | Mechanisches | 2 | | photo=Nase_20111013_023.jpg}}
{{ii| 2x5 Shrouded Header | RM 100 | Mechanisches | ~23 | 0.08 EUR ({{reichelt|article=22816}}) | photo=20110705_007.jpg}}
{{ii| 2x5 Female Header (IDC) | RM 100 | Mechanisches | 20 | 0.08 EUR ({{reichelt|article=14571}}) | photo=20110705_008.jpg}}
{{ii| 2x8 Shrouded Header | RM 100 | Mechanisches | 2 | | photo=Nase_20111013_021.jpg}}
{{ii| 2x8 Female Header (IDC) | RM 100 | Mechanisches | 2 | | photo=Nase_20111013_020.jpg}}
{{ii| 2x20 Shrouded Header | RM 100 | Mechanisches | 2 | | photo=Nase_20111013_019.jpg}}
{{ii| 2x20 Female Header (IDC) | RM 100 | Mechanisches | 1 | 0.17 EUR | photo=Nase_20111013_018.jpg}}
{{ii| 5 mm input lab jack | | Mechanisches | 5 | 0.21 EUR | photo=20110705_011.jpg}}
{{ii| 5 mm lab jack | | Mechanisches | 2 | 0.15 EUR | photo=20110705_009.jpg}}
{{ii| Barrel Connector female | | Mechanisches | 0 | 0.21 EUR | photo=Nase_20110725_063.jpg}}
{{ii| Barrel Connector male | | Mechanisches | 0 | 0.30 EUR | photo=Nase_20110725_064.jpg}}
{{ii| 5mm Screw Terminal | | Mechanisches | 4 | 0.10 EUR | photo=Nase_20110725_043.jpg}}
{{ii| USB B | THT | Mechanisches | 1 | 0.20 EUR (?) | photo=Nase_20110725_061.jpg}}
{{ii| USB A | SMD | Mechanisches | 41 | tbd | photo=usb_a_smd-1.jpg}}
{{ii| Mini-USB B | THT | Mechanisches | 1 | 0.30 EUR (?) | photo=Nase_20110828_005.jpg}}
{{ii| Mini-USB B | SMD | Mechanisches | 1 | tbd | photo=Nase_20110828_005.jpg}}
{{ii| Mikro-USB B | SMD | Mechanisches | 5 | 0.30 EUR (?) | photo=Nase_20110828_012.jpg}}
{{ii| D-Sub 25-pin female | | Mechanisches | 2 | tbd | photo=Nase_20110725_073.jpg}}
{{ii| D-Sub 25-pin male | | Mechanisches | 1 | tbd | photo=Nase_20110725_067.jpg}}
{{ii| D-Sub 9-pin female pcb | | Mechanisches | 2 | tbd | photo=Nase_20110725_065.jpg}}
{{ii| D-Sub 9-pin female solder | | Mechanisches | 1 | tbd | photo=Nase_20110725_066.jpg}}
{{ii| 20-cable female cobbler | | Mechanisches | 3 | 1.30 EUR | photo=Nase_20140115_001.jpg}}
{{Inventory Table Footer}}

==Fuse holder==
{{Inventory Table Header|Type}}
{{ii| Fuse holder | | Mechanisches | 3 | tbd | photo=Nase_20110725_062.jpg}}
{{Inventory Table Footer}}

==Screws==
{{Inventory Table Header|Type}}
{{ii| M3 x 6 mm | Schlitz | Screws | > 30 | 0.01 EUR | photo=20110705_012.jpg}}
{{ii| M4 x 40 mm | Schlitz | Screws | > 30 | 0.03 EUR | photo=20110705_013.jpg}}
{{ii| M4 x 50 mm | Schlitz | Screws | > 30 | 0.03 EUR | photo=20110705_014.jpg}}
{{ii| Nut M3 | | Screws | 0 | tbd | photo=Nase_20110725_051.jpg}}
{{Inventory Table Footer}}

==Sockets==
{{Inventory Table Header|Type}}
{{ii| ZIF Socket (28 pins) | | Mechanisches | 2 | 0.50 EUR | photo=Nase_20110717_001.jpg}}
{{ii| ZIF Socket (32 pins) | | Mechanisches | 2 | 0.50 EUR | photo=Nase_20110717_002.jpg}}
{{ii| DIL-8-300 Socket | | Box 3 | 2 | 0.10 | photo=Nase_20110717_034.jpg}}
{{ii| DIL-16-300 Socket | | Box 3 | ~10 | 0.10 }}
{{ii| DIL-18-300 Socket | | Box 3 | 2 | 0.10 | photo=Nase_20110717_035.jpg}}
{{ii| DIL-28-300 Socket | | Box 3 | 0 | 0.10 | photo=Nase_20110717_036.jpg}}
{{ii| DIL-40-600 Socket | | Box 3 | 0 | 0.10 | photo=Nase_20110717_037.jpg}}
{{Inventory Table Footer}}

==Motors==
{{Inventory Table Header|Type}}
{{ii| servo motor 'micro servo 9g' (3D Model: [[Micro Servo 9G]]) | | Mechanisches | 4 | 1.88 EUR | photo=Nase_20110717_003.jpg}}

{{ii| servo motor 'RC Servo 36g 1019F01' | | Mechanisches | 2 | 2.75 EUR | photo=servo_35g.jpg}}

{{ii| Paper transport thing with switch and motor
| MBL1314A | Mechanisches | 3 | tbd | photo=Mbl1314A.jpg}}
{{Inventory Table Footer}}

==Magnets==
{{Inventory Table Header|Type}}
{{ii| several types of pull magnets| | Mechanisches | 2 | tbd | photo=Nase_20110717_005.jpg}}
{{Inventory Table Footer}}

==Breadboards==
{{Inventory Table Header|Type}}
{{ii| breadboard| | Perfboard | 5 | 2 EUR | photo=Nase_20110816_006.jpg}}
{{Inventory Table Footer}}

==Heat Sinks==
{{Inventory Table Header|Type}}
{{ii| Heat Sink| | Mechanisches | 1 | 2 EUR | photo=Nase_20110828_014.jpg}}
{{ii| Heat Sink| | Mechanisches | 1 | 3 EUR | photo=Nase_20110828_015.jpg}}
{{ii| Heat Sink| | Mechanisches | 1 | 2 EUR | photo=P1080792 half.jpg}}
{{ii| Heat Sink with fan| | Mechanisches | 1 | 5 EUR | photo=P1080795 half.jpg}}
{{Inventory Table Footer}}

==Battery holder==
{{Inventory Table Header|Type}}
{{ii| CR battery holder | | Lilypad | 5 | 0.84 EUR | photo=cr_battery_holder.jpg}}
{{ii| Lilypad 1xAAA battery holder | | Lilypad | 2 | 10.92 EUR | photo=lilypad_battery_holder.jpg}}
[[Category:Inventory]]
{{Inventory Table Footer}}

Inventory/Mechanical Devices

2014-02-14T23:38:20Z

Miga: /* Pushbuttons */

==Switches==
{{Inventory Table Header|Type}}
{{ii| Quad SMD DIP Switch | SO-DIP8 | Mechanisches | 42 | 0.25 EUR ([[Benutzer:Marvin]]), [http://de.farnell.com/apem/ikn0403000/dip-schalter/dp/1703842] | photo=20110705_001.jpg}}
{{ii| 12x DIP switch | | Box 2 | 3 | 0.30 EUR? | photo=Nase_20110717_028.jpg}}
{{ii| SMT Switch | | Box 2 | ~15 | 0.05 EUR | photo=Nase_20110725_034.jpg}}
{{ii| Switch | | Box 2 | 2 | 0.30 EUR | photo=Nase_20110725_033.jpg}}
{{Inventory Table Footer}}

==Pushbuttons==
{{Inventory Table Header|Type}}
{{ii| Pushbutton | | Box 2 | ~30 | 0.05 EUR | photo=Nase_20110717_025.jpg}}
{{ii| Pushbutton | | Box 2 | 0 | 0.30 EUR | photo=Nase_20110717_027.jpg}}
{{ii| Pushbutton | | Box 2 | 0 | 0.15 EUR | photo=Nase_20110725_029.jpg}}
{{ii| Pushbutton | | Box 2 | ~20 | 0.05 EUR | photo=Nase_20110725_031.jpg}}
{{ii| Pushbutton | | Box 2 | 1 | 0.15 EUR | photo=Nase_20110725_032.jpg}}
{{ii| Pushbutton | used and really crappy| Box 2 | 6 | 0.05 EUR | photo=Nase_20110725_036.jpg}}
{{ii| Fabric 5xbutton | | Mechanical devices | 1 | 16.81 EUR | photo=button_pad.jpg}}
{{Inventory Table Footer}}

==Joystick==
{{Inventory Table Header|Type}}
{{ii| 4-way joystick | | Box 2 | 1 | 2 EUR | photo=Nase_20110725_042.jpg}}
{{Inventory Table Footer}}

==Encoders==
{{Inventory Table Header|Type}}
{{ii| ALPS EC11 18-step without button | | Box 2 | 4 | 1 EUR | photo=Nase_20110725_035.jpg}}
{{Inventory Table Footer}}

==Relays==
{{Inventory Table Header|Type}}
{{ii| {{ds|JSM1|JSM1a-9V-5}} | SPST Relay, V_{coil}{{eq}} 9 V | Mechanisches | 10 | 0.50 | photo=Nase_20110717_032.jpg}}
{{ii| {{ds|G6S|G6S-2G-Y}} | DPDT Relay, V_{coil}{{eq}}24 V | Mechanisches | 28 | 0.30 | photo=Nase_20110717_033.jpg}}
{{ii| | SPDT Relay, V_{coil}{{eq}}12 V | Mechanisches | 7 | 0.40 | photo=Nase_20110725_077.jpg}}
{{Inventory Table Footer}}

==Connectors, Screw Terminals and Headers==
{{Inventory Table Header|Type}}
{{ii| Lustre Terminal | black | Mechanisches | 47 | tbd | photo=20110705_002.jpg}}
{{ii| Straight Pin Header | RM 100 | Pin Header Straight M-M | > 1000 | 0.005 EUR / pin | photo=20110705_003.jpg}}
{{ii| Pin Header 90 degrees | RM 100 | Pin Headers 90 | > 200 | 0.005 EUR / pin | photo=20110705_005.jpg}}
{{ii| Female Pin Header | RM 100 | Pin Headers M-F | 255 | 0.01 EUR / pin ({{csd|014-B140G}}) | photo=20110705_006.jpg}}
{{ii| Jumper | | Mechanisches | ~20 | 0.01 EUR }}
{{ii| 2x3 Shrouded Header | RM 100 | Mechanisches | 2 | | photo=Nase_20111013_025.jpg}}
{{ii| 2x3 Female Header (IDC) | RM 100 | Mechanisches | 2 | | photo=Nase_20111013_023.jpg}}
{{ii| 2x5 Shrouded Header | RM 100 | Mechanisches | ~23 | 0.08 EUR ({{reichelt|article=22816}}) | photo=20110705_007.jpg}}
{{ii| 2x5 Female Header (IDC) | RM 100 | Mechanisches | 20 | 0.08 EUR ({{reichelt|article=14571}}) | photo=20110705_008.jpg}}
{{ii| 2x8 Shrouded Header | RM 100 | Mechanisches | 2 | | photo=Nase_20111013_021.jpg}}
{{ii| 2x8 Female Header (IDC) | RM 100 | Mechanisches | 2 | | photo=Nase_20111013_020.jpg}}
{{ii| 2x20 Shrouded Header | RM 100 | Mechanisches | 2 | | photo=Nase_20111013_019.jpg}}
{{ii| 2x20 Female Header (IDC) | RM 100 | Mechanisches | 1 | 0.17 EUR | photo=Nase_20111013_018.jpg}}
{{ii| 5 mm input lab jack | | Mechanisches | 5 | 0.21 EUR | photo=20110705_011.jpg}}
{{ii| 5 mm lab jack | | Mechanisches | 2 | 0.15 EUR | photo=20110705_009.jpg}}
{{ii| Barrel Connector female | | Mechanisches | 0 | 0.21 EUR | photo=Nase_20110725_063.jpg}}
{{ii| Barrel Connector male | | Mechanisches | 0 | 0.30 EUR | photo=Nase_20110725_064.jpg}}
{{ii| 5mm Screw Terminal | | Mechanisches | 4 | 0.10 EUR | photo=Nase_20110725_043.jpg}}
{{ii| USB B | THT | Mechanisches | 1 | 0.20 EUR (?) | photo=Nase_20110725_061.jpg}}
{{ii| USB A | SMD | Mechanisches | 41 | tbd | photo=usb_a_smd-1.jpg}}
{{ii| Mini-USB B | THT | Mechanisches | 1 | 0.30 EUR (?) | photo=Nase_20110828_005.jpg}}
{{ii| Mini-USB B | SMD | Mechanisches | 1 | tbd | photo=Nase_20110828_005.jpg}}
{{ii| Mikro-USB B | SMD | Mechanisches | 5 | 0.30 EUR (?) | photo=Nase_20110828_012.jpg}}
{{ii| D-Sub 25-pin female | | Mechanisches | 2 | tbd | photo=Nase_20110725_073.jpg}}
{{ii| D-Sub 25-pin male | | Mechanisches | 1 | tbd | photo=Nase_20110725_067.jpg}}
{{ii| D-Sub 9-pin female pcb | | Mechanisches | 2 | tbd | photo=Nase_20110725_065.jpg}}
{{ii| D-Sub 9-pin female solder | | Mechanisches | 1 | tbd | photo=Nase_20110725_066.jpg}}
{{ii| 20-cable female cobbler | | Mechanisches | 3 | 1.30 EUR | photo=Nase_20140115_001.jpg}}
{{Inventory Table Footer}}

==Fuse holder==
{{Inventory Table Header|Type}}
{{ii| Fuse holder | | Mechanisches | 3 | tbd | photo=Nase_20110725_062.jpg}}
{{Inventory Table Footer}}

==Screws==
{{Inventory Table Header|Type}}
{{ii| M3 x 6 mm | Schlitz | Screws | > 30 | 0.01 EUR | photo=20110705_012.jpg}}
{{ii| M4 x 40 mm | Schlitz | Screws | > 30 | 0.03 EUR | photo=20110705_013.jpg}}
{{ii| M4 x 50 mm | Schlitz | Screws | > 30 | 0.03 EUR | photo=20110705_014.jpg}}
{{ii| Nut M3 | | Screws | 0 | tbd | photo=Nase_20110725_051.jpg}}
{{Inventory Table Footer}}

==Sockets==
{{Inventory Table Header|Type}}
{{ii| ZIF Socket (28 pins) | | Mechanisches | 2 | 0.50 EUR | photo=Nase_20110717_001.jpg}}
{{ii| ZIF Socket (32 pins) | | Mechanisches | 2 | 0.50 EUR | photo=Nase_20110717_002.jpg}}
{{ii| DIL-8-300 Socket | | Box 3 | 2 | 0.10 | photo=Nase_20110717_034.jpg}}
{{ii| DIL-16-300 Socket | | Box 3 | ~10 | 0.10 }}
{{ii| DIL-18-300 Socket | | Box 3 | 2 | 0.10 | photo=Nase_20110717_035.jpg}}
{{ii| DIL-28-300 Socket | | Box 3 | 1 | 0.10 | photo=Nase_20110717_036.jpg}}
{{ii| DIL-40-600 Socket | | Box 3 | 0 | 0.10 | photo=Nase_20110717_037.jpg}}
{{Inventory Table Footer}}

==Motors==
{{Inventory Table Header|Type}}
{{ii| servo motor 'micro servo 9g' (3D Model: [[Micro Servo 9G]]) | | Mechanisches | 4 | 1.88 EUR | photo=Nase_20110717_003.jpg}}

{{ii| servo motor 'RC Servo 36g 1019F01' | | Mechanisches | 2 | 2.75 EUR | photo=servo_35g.jpg}}

{{ii| Paper transport thing with switch and motor
| MBL1314A | Mechanisches | 3 | tbd | photo=Mbl1314A.jpg}}
{{Inventory Table Footer}}

==Magnets==
{{Inventory Table Header|Type}}
{{ii| several types of pull magnets| | Mechanisches | 2 | tbd | photo=Nase_20110717_005.jpg}}
{{Inventory Table Footer}}

==Breadboards==
{{Inventory Table Header|Type}}
{{ii| breadboard| | Perfboard | 5 | 2 EUR | photo=Nase_20110816_006.jpg}}
{{Inventory Table Footer}}

==Heat Sinks==
{{Inventory Table Header|Type}}
{{ii| Heat Sink| | Mechanisches | 1 | 2 EUR | photo=Nase_20110828_014.jpg}}
{{ii| Heat Sink| | Mechanisches | 1 | 3 EUR | photo=Nase_20110828_015.jpg}}
{{ii| Heat Sink| | Mechanisches | 1 | 2 EUR | photo=P1080792 half.jpg}}
{{ii| Heat Sink with fan| | Mechanisches | 1 | 5 EUR | photo=P1080795 half.jpg}}
{{Inventory Table Footer}}

==Battery holder==
{{Inventory Table Header|Type}}
{{ii| CR battery holder | | Lilypad | 5 | 0.84 EUR | photo=cr_battery_holder.jpg}}
{{ii| Lilypad 1xAAA battery holder | | Lilypad | 2 | 10.92 EUR | photo=lilypad_battery_holder.jpg}}
[[Category:Inventory]]
{{Inventory Table Footer}}

Lilypad

2014-02-14T17:49:00Z

Miga: /* Demos */ Zusätz: firewalkers

=Lilypad SIG=

Lilypad is:

1. Placement of small electronic element on a fabric, so that it can be sewn.

2. Name for [http://www.tinkersoup.de/lilypad-wearable/ Arduino on a "lilypad(1)"]

3. [http://lilypadarduino.org/ Company] that produces lilypads(1) and (2).

Lilypads are used for so called soft-circuits or sewable electronics - circuits that you can sew onto a fabric instead of PCB.

If interested, please register to [https://lists.cccgoe.de/mailman/listinfo/lilypad mailing list].

==Example components==

* [https://www.sparkfun.com/products/10274 Lilypad microcontroller]
* [http://www.tinkersoup.de/lilypad-wearable/lilypad-mp3/a-908/ Lilypad MP3 uC with SD reader]
* [https://www.sparkfun.com/products/11791 Conductive thread]
* [https://www.sparkfun.com/products/10730 Battery holder]
* [https://www.sparkfun.com/products/9267 Accelerometer]
* [https://www.sparkfun.com/products/8464 Light sensor]
* [https://www.sparkfun.com/products/8776 Button]
* [https://www.sparkfun.com/products/11289 Heating pad]
* [https://www.sparkfun.com/products/11521 Conductive Paint Pen]

===Demos===

Demos:
* [http://www.youtube.com/watch?v=0cRKdzIhbZM Example project]
* [http://www.youtube.com/watch?v=6YeBbXDmqEc Kim Dotcom's party amplifier]
* [http://thekneeslider.com/turn-signal-jackets-with-sewn-in-turn-signals/ Bike coats]
* [https://twitter.com/rwinscot/status/434373924131196929/photo/1 Firewalkers - LED boots]

Servo-control on Lime

2014-02-14T13:28:53Z

Miga: /* Servo-control on Lime */

= Ideas =

May try to:
# port PWM daemon from Raspberry Pi https://projects.drogon.net/software-pwm-on-the-raspberry-pi/
# try to port ServoBlaster daemon from Pi https://github.com/threeme3/PiBits/tree/master/ServoBlaster
# get RTAI http://www.rtai.org/ and write own PWM daemon for GPIOs (RTAI is hard realtime, but not sure if writing to GPIO will not hang the system; should try to access GPIOs directly?)

Servo-control on Lime

2014-02-14T13:28:40Z

Miga: /* Servo-control on Lime */ Added ServoBlaster

= Servo-control on Lime =

May try to:
# port PWM daemon from Raspberry Pi https://projects.drogon.net/software-pwm-on-the-raspberry-pi/
# try to port ServoBlaster daemon from Pi https://github.com/threeme3/PiBits/tree/master/ServoBlaster
# get RTAI http://www.rtai.org/ and write own PWM daemon for GPIOs (RTAI is hard realtime, but not sure if writing to GPIO will not hang the system; should try to access GPIOs directly?)

Servo-control on Lime

2014-02-14T13:23:37Z

Miga: Anfang

= Servo-control on Lime =

May try to:
# port PWM daemon from Raspberry Pi https://projects.drogon.net/software-pwm-on-the-raspberry-pi/
# get RTAI http://www.rtai.org/ and write own PWM daemon for GPIOs (RTAI is hard realtime, but not sure if writing to GPIO will not hang the system; should try to access GPIOs directly?)

LinuxFrüchten

2014-02-14T13:20:31Z

Miga: /* Raspberry Pi */ Zusätz projektliste

=LinuxFrüchten=

Viele projekten benutzt [[Raspberry Pi]] oder OLinuxino [[Lime]] für Linux-basierte kontrolle.

Hier ist die anfang für generele dokumentierung für Linux-auf-Arm, Linux GPIO etc. sachen in CCC.

== Raspberry Pi ==

[[Raspberry Pi]] war erste und wir haben 4-5 RasPi projekte:

* [[Raspberry Pi/Gehäuse]] von Thingiverse
* [[Raspberry Pi]] kontrolliert Arduinos ...
* [[Alex/Wspr/WsprryPi]] - Raspberry Pi WSPR transmitter
* [[RaspberryPi/boot_script]] - ACPI-like power button and LED

== OLinuxino Lime ==

Wir habe noch drei [[Lime]] projekten:

* [[Ubuntu on Lime]] -- bendet, Ubuntu läuft schön.
* [[Servo-control on Lime]] -- mann will anprobiere zu benutzen Raspberry Pi PWM daemon mit Lime
* [[1-wire control on Lime]] -- zu lesen 1-wire (Dallas) sensoren auf Lime

Ubuntu on Lime

2014-02-14T13:16:08Z

Miga: Anfang

1. Made sunxi-boot and sunxi-kernel (with modules) in accord with Lime's tutorial for Debian:

''https://olimex.wordpress.com/2013/12/13/building-debian-linux-image-for-a10-olinuxino-lime-with-kernel-3-4-67/''

2. Downloaded armhf versions of packages missing for network, and put them to ''/root'' on boot image.

http://ports.ubuntu.com/ubuntu-ports/pool/main/b/busybox/busybox-static_1.21.0-1ubuntu1_armhf.deb
http://ports.ubuntu.com/ubuntu-ports/pool/main/n/net-tools/net-tools_1.60-25ubuntu1_armhf.deb
http://ports.ubuntu.com/ubuntu-ports/pool/main/b/busybox/udhcpc_1.21.0-1ubuntu1_armhf.deb

3. Configure serial '''almost''' in accord to:

''https://help.ubuntu.com/community/SerialConsoleHowto''

The only change is ''--autologin root'' parameter for getty.

cat - > etc/init/ttyS0.conf <<EOF
# ttyS0 - getty
#
# This service maintains a getty on ttyS0 from the point the system is
# started until it is shut down again.

start on stopped rc or RUNLEVEL=[12345]
stop on runlevel [!12345]

respawn
exec /sbin/getty --autologin root -L 115200 ttyS0 vt102
EOF

cat - > etc/event.d/ttyS0 <<EOF
# ttyS0 - getty
#
# This service maintains a getty on ttyS0 from the point the system is
# started until it is shut down again.

start on runlevel 1
start on runlevel 2
start on runlevel 3
start on runlevel 4
start on runlevel 5

stop on runlevel 0
stop on runlevel 6

respawn
exec /sbin/getty 115200 ttyS0
EOF

4. After booting and logging through serial (''screen /dev/ttyUSB0 115200''):

dpkg -i *.deb

cat - > /etc/network/interfaces.d/eth0 <<EOF
auto eth0
iface eth0 inet dhcp
EOF

5. Uncomment universe and multiverse repositories and then apt-get update
and install whatever packages I need.

6. To have access to sunxi config tools, compile:

git clone https://github.com/linux-sunxi/sunxi-tools

7. [Optional:] to get Mali drivers:

git clone https://github.com/linux-sunxi/sunxi-mali.git && \
git submodule init && \
git submodule update

8. For GPIO:

echo 'gpio_sunxi' >> /etc/modules
modprobe gpio_sunxi

Lime

2014-02-14T13:05:14Z

Miga: /* OLinuxino Lime */

= OLinuxino Lime =

Is a new competitor to Raspberry Pi.

Advantages comparative to Pi:

* Faster
* Uses less power (as little as 0.3A, instead of 2-3A under load)
* SATA socket
* LVDS LCD socket
* ~160 GPIOs (4 big slots, and one small; one big slot shared with LCD socket)
* Reserved 1mm serial pins (not shared with GPIO!)
* Open Hardware

Disadvantages:

* Released later (end of 2013)
* Smaller community support (but sunxi community is growing)
* ARM Mali GPU is supposed to be theoretically less powerful than Raspberry Pi's VideoCore
* GPIO have 0.5mm pin spacing instead of 1mm like in Pi and Arduino

== Lime projects ==

* [[Ubuntu on Lime]]
* ...

Lime

2014-02-14T13:04:38Z

Miga:

Lime

2014-02-14T13:04:12Z

Miga: Anfang

= Lime =

Is a new competitor to Raspberry Pi.

Advantages comparative to Pi:

* Faster
* Uses less power (as little as 0.3A, instead of 2-3A under load)
* SATA socket
* LVDS LCD socket
* ~160 GPIOs (4 big slots, and one small; one big slot shared with LCD socket)
* Reserved 1mm serial pins (not shared with GPIO!)

Disadvantages:

* Released later (end of 2013)
* Smaller community support (but sunxi community is growing)
* ARM Mali GPU is supposed to be theoretically less powerful than Raspberry Pi's VideoCore
* GPIO have 0.5mm pin spacing instead of 1mm like in Pi and Arduino

LinuxFrüchten

2014-02-14T12:59:45Z

Miga: Anfäng

=LinuxFrüchten=

Viele projekten benutzt [[Raspberry Pi]] oder OLinuxino [[Lime]] für Linux-basierte kontrolle.

Hier ist die anfang für generele dokumentierung für Linux-auf-Arm, Linux GPIO etc. sachen in CCC.

== Raspberry Pi ==

[[Raspberry Pi]] war erste und wir haben 4-5 RasPi projekte:

* [[Raspberry Pi/Gehäuse]] von Thingiverse
* [[Raspberry Pi]] kontrolliert Arduinos ...
* ... bitte dokumentieren ...

== OLinuxino Lime ==

Wir habe noch drei [[Lime]] projekten:

* [[Ubuntu on Lime]] -- bendet, Ubuntu läuft schön.
* [[Servo-control on Lime]] -- mann will anprobiere zu benutzen Raspberry Pi PWM daemon mit Lime
* [[1-wire control on Lime]] -- zu lesen 1-wire (Dallas) sensoren auf Lime

Hauptseite

2014-02-14T12:52:37Z

Miga: /* Projekte */ Zusätz: LinuxFrüchten projekt

__NOTOC__

{{Template:Status}}

Dies ist die Seite des '''CCC Göttingen'''. Wir sind der Göttinger Erfa-Kreis des [http://www.ccc.de/ '''Chaos Computer Club'''] und unterhalten den Hackerspace [[Noklab|'''Noklab''']].

Unser [http://de.wikipedia.org/wiki/Hackerspace Hackerspace] ist fast jeden Tag bevölkert. Unter [http://hackerspaces.me/wall hackerspaces.me] oder in unserem [[:Communication | MUC]] kann in Erfahrung gebracht werden, ob das NOKLAB gerade offen ist. Neugierige können gerne jederzeit vorbeischauen, um uns kennenzulernen. Außerhalb des [[OpenChaos]] kann es jedoch passieren, dass wir sehr beschäftigt sind. Im Zweifelsfall kannst Du dich gerne im [[:Communication | MUC]] oder per [[:Communication | Mail]] ankündigen, wenn Du uns besuchen möchtest!

<center>'''[[Mitglied werden]]!'''</center>

[[Datei:Alex lotta 20130729.BQDBTzECIAEgNSC.jpg | 550px]]

=Veranstaltungen=

Jeden zweiten Dienstag um 20 Uhr ist im [[Noklab]] ein explizit öffentliches Treffen, das '''[[OpenChaos]]'''. Jeder der uns kennenlernen möchte, ist eingeladen, an diesem Termin unverbindlich und spontan vorbeizuschauen.
Es finden Diskussionen zu aktuellen Themen und den laufenden Projekten statt und zudem werden unregelmäßig Vorträge gehalten, die '''[[Lightning Talks]]'''.




{{Template:Termine}}


''Auch in anderen Städten lohnt es sich bei den jeweiligen [http://ccc.de/de/regional Chaostreffs, Erfakreise], [http://hackerspaces.org/wiki/ Hackerspaces] und FabLabs nach aktuellen Terminen zu schauen. Für Infos über größere Events besucht events.ccc.de.''

[[Vergangenes|Vergangene Events]]

= Projekte =
{|class="wikitable"
!colspan="3"|Aktive Projekte
|-
|[[CNC Laser]] || Erste Experimente mit diversen Laserdioden. Endziel ist ein CNC Laser Cutter für Papier, Aufkleber, Platinen, Holz und anderes.|| Mitarbeit erwünscht
|-
|[[Trägheitsnavigation]] || Wie gut kann man einen Posenverlauf über Accelerometer und Gyroskope nachvollziehen? (Pose = Orientierung + Position) || Ergebnis: Sensoren viel zu ungenau, um damit navigieren zu können
|-
|[[3D-Drucker]] || 3-D drucken und am Drucker basteln || Mitarbeit erwünscht
|-
|[[Datei:Alex lotta 01 .IMG 7726.JPG|150px]]||[[pic32|PIC32 Experimente]]: Elektronik lernen und Microkontroller programmieren mit und ohne Pinguinoboard. Flauschballelektronik und andere Spielerein || Hier könnt Ihr gerne mitmachen!
|-
|[[BeamMeUp]] || Stabile Aufhängung für unseren Monsterbeamer || Mitarbeit erwünscht
|-
|[[Norbot]] || XMPP/Jabber Bot || Pausiert
|-
|[[Modlight | Moodlights]] || [[Noklab]] Raumbeleuchtung || Gehäuse fehlen, Software fehlt, etc. Mitarbeit erwünscht
|-
|[[Datei:Wall.jpg|150px]]|| NOKLAB [[Wandbemalung]] mit Features || Mitkünstler* gesucht; Motivideen bitte auf der Wikiseite eintragen
|-
|[http://quantenbotanik.de/flauschballelektronik/ Flauschball] || Elektronik für den Flauschball || Ideen gern gehört, später Mithilfe bei PIC32 Programmierung MIPS Assembler und/oder C
|-
|[[Logo]] || Entwicklung von Logos für NOKLAB und ccc_goe || Anstross/Ideen/Eigene Arbeiten erwünscht
|-
| [[Hackercocktail]] || Liste lustiger Cocktails zum Coden || Cocktailparty gesucht
|-
|[[Inventory|E-Lager]] || Lager an Elektronikbauteilen für den täglichen Gebrauch || immer korrigierbar; gerne aktualisieren und fehlende Fotos hochladen
|-
|[[SpaceAPI]] || Space Status per Web API ||
|-
|[[SDRSpiel]] || Software-Defined Radio - FM, AM dekodierung von publik Spektrumbanden || mitarbeiter erwünscht, am besten mit Amateur Radio Lizenz
|-
|[[BioHacking]] || Haskell für Bioinformatik und spaß || mitarbeiter erwünscht
|-
|[[LinuxFrüchten]] || RasPi und Lime projects|| dokumentierung erwünscht
|-
|}

{|class="wikitable"
!colspan="2"|Abgeschlossene Projekte
|-
|[[Datei:AlexN900 01 20120423 003.jpg|150px]]||[[Pixelflut]] Netzwerk+Pixel=Kunst
|-
|[[Datei:Spacemaster-7000.jpg|150px]]||[[Spacemaster_7000]]: Spacestatusmanagementdevice
|-
|[[Schliesssystem]] || Automatisches Türöffnungssystem
|-
|[[Datei:Nase 20110731 002.jpg|150px]] ||[[No Apple Sign]]: Statusanzeige, ob Applegeräte im NOKLAB sind
|-
|[[Datei:Tvbgone.png|150px]]|| SMD-Bausatz für [[TVBGone/en|TVBGone]]
|-
|[[Datei:Das bild1.jpg|150px]] ||[[Bweamer]]: schwarz/weiß Beamer mit LED
|-
|[[Datei:Nase 20090118 001.jpg|150px]]||[[Kuschelig]]: Heizungssteuerung per XMPP
|-
|[[USB Keyboard]] ||
|-
|[[2wiki.sh]] || Fotoupload ins Mediawiki per N900 (TODO: port aufs N9)
|-
|[[Marble Storage Ring]] || Murmelbahn, die [http://www.youtube.com/watch?v=ljPB0DanK74 läuft und läuft und ...]
|-
|[[Sprachchat]] || Mumble
|-
|[[Brainfuck-Ook-Compiler]] ||
|-
|[[OZ960-hack]] || Reparatur der Hintergrundbeleuchtung eines Samsung X10 Notebooks
|-
|}

Hardwarestuff zum Verbasteln für neue Projekte findet ihr [[Rumflieghardware|hier]].

[[:Category:Bausaetze|Bausätze]]

[[:Category:Projekte|Projektarchiv]]

= Kontakt =
[[File:Anfahrt.png|thumb|300px|roter Marker: [[Noklab]] (Neustadt 7, 37073 Göttingen); türkiser Marker: Bahnhof Göttingen]]
{{:Communication}}

===Wegbeschreibung===
Zum Noklab: Vom Bahnhof aus die Goetheallee Richtung Innenstadt laufen und die zweite Strasse (Neustadt) rechts abbliegen.

Parken: In der Strasse kann nach 19 Uhr unter der Woche und nach 17 Uhr am Samstag kostenlos geparkt werden.

Lilypad

2014-02-12T22:32:01Z

Miga: Änfang

Vorlage:Termine

2014-02-12T22:18:22Z

Miga: Zusätz: Lilypad

{|class="wikitable"
!colspan="3" style="background-color:#8f8fe7;"|Termine von uns, benachbarten Erfas und Veranstaltungen zu denen wir fahren
|-
! style="width:12em;"|Date || Veranstaltung || Location
|-
| align="right" | '''12. Feb, 18:00'''
| style="padding-left:1em;" | [https://www.cryptoparty.in/goettingen Cryptoparty]
| align="right" | '''JT-Kantine'''
|-
| align="right" | '''13. Feb, 20:00'''
| style="padding-left:1em;" | [[Lilypad]] treffen
| align="right" | '''Noklab'''
|-
| align="right" | '''18 Apr - 21 Apr'''
| style="padding-left:1em;" | [http://eh14.easterhegg.eu/ Easterhegg]
| align="right" | '''Stuttgart'''
|-
| align="right" | '''13 Sep - 14 Sep'''
| style="padding-left:1em;" | Datenspuren
| align="right" | ''' Dresden'''
|-
|}

Inventory/Microcontrollers

2014-02-09T23:11:42Z

Miga: /* AVR */

==AVR==
{{Inventory Table Header|Type}}
{{ii| {{ds|atmega16|ATMEGA16-16PU}} | | Box 4 | 3 | 3.65 EUR, {{Reichelt|article=45028}} | photo=Nase_20110717_042.jpg}}
{{ii| {{ds|atmega8|ATMEGA8L-8PU}} | | Box 4 | 0 | 2.20 EUR {{Reichelt|article=45025}} | photo=Nase_20110718_001.jpg}}
{{ii| {{ds|atmega88|ATMEGA88-20AU}} | | Box 4 | 4 | 2.95 EUR, {{Reichelt|article=68168}} | photo=Nase_20110729_001.jpg}}
{{ii| {{ds|at90s1200|AT90S1200-16PC}} | | Box 4 | 2 | tbd | photo=Nase_20110718_002.jpg}}
{{ii| {{ds|attiny2313|ATTINY2313-20PU}} | | Box 4 | 3 | tbd | photo=Nase_20110725_023.jpg}}
{{ii| {{ds|attiny1320|ATTINY13 20-SO}} | | Box 4 | 3 | tbd |}}
{{ii| {{ds|attiny45V-10SI|ATTINY45V-10SI}} | | Box 4 | 3 | tbd |}}
{{ii| {{ds|flora|ATMEGA328V-8PU}} on Lilypad | | Lilypad | 4 | 15e | photo=flora.jpg }}

{{Inventory Table Footer}}

==MSP430==
{{Inventory Table Header|Type}}
{{ii| {{ds|MSP430G2231}} | | Box 4 | 2 | tbd | photo=Nase_20110718_003.jpg}}
{{ii| {{ds|MSP430G2201}} | | Box 4 | 3 | tbd | photo=Nase_20110718_004.jpg}}
{{Inventory Table Footer}}

==PIC==
{{Inventory Table Header|Type}}
{{ii| {{ds|PIC16F877}} | | Box 4 | 1 | tbd | photo=Nase_20110718_005.jpg}}
{{ii| {{ds|PIC16F84}} | | Box 4 | 3 | tbd | photo=Nase_20110718_006.jpg}}
{{ii| {{ds|PIC32MX}} | | Box 4 | 3 | tbd | photo=PIC32MX.jpg}}
{{Inventory Table Footer}}

==8051==
{{Inventory Table Header|Type}}
{{ii| {{ds|C8051F330}} | | Box 4 | 2 | tbd | photo=Nase_20110718_014.jpg}}
{{Inventory Table Footer}}

[[Category:Inventory]]

Inventory/Meta/Ordering

2014-02-09T16:00:46Z

Miga: /* Immer mal wieder */ Link für "billiger"

This page contains the list of parts we may order next:
__FORCETOC__
{| class="wikitable"
! Part
! Amount
! Where
|-
| 2x5 Female Header (IDC) || || {{reichelt|article=14571}}
|-
| USB B || ||
|-
| Optokoppler, zB PC817 || 10 ||
|-
| Streifenrasterplatinen || 5 ||
|}

== Wishlist ==
Everything that hasn't been in the lab up until now but you really want it:
{| class="wikitable"
! Part
! Amount
! Where
|-
|
! Polyfuse 800mA (e.g. USB 2.0 polyfuse)
! 5-10
! ?
|-
|
! Polyfuse 50mA (e.g. ATmega GPIO polyfuse)
! 5-10
! ?
|-
|}

== Immer mal wieder ==
{| class="wikitable"
! Part
! Amount
! Where
|-
| 1k metal film resistors, leaded || >= 1000 || 1* {{digikey|keywords=S1KCATR-ND}} or 1000 * {{reichelt|article=11403}}
|-
| {{ds|FT232R}} USB-UART Transceiver, SSOP-28 || Notiz: wir haben noch 4x USB-UART gerät von China [https://cccgoe.de/wiki/Inventory/ICs#Transceiver billiger] wie Reichelt! || {{reichelt|article=64399}}
|-
|{{ii| 2x5 Female Header (IDC) || || {{reichelt|article=14571}}
|}

== Next Reichelt ==
{| class="wikitable"
! Part
! Amount
! Where
! Full Price
! Account
|-
| Heizungsregler || 2 || {{reichelt|article=102691}} || 29.90 || Verein
|-
| Seitenschneider || 2 || {{reichelt|article=44687}} || 35.30 || Verein
|-
| Entloetlitze || 1 || {{reichelt|article=7390}} || 14.40 || eLab
|-
| Grundtonquarze || 1 || [[#WK1]] || 7.16 || eLab
|-
| R 1k || 100 || {{reichelt|article=11403}} || 2.25 || eLab
|-
| ATTINY 13-20 SO || 3 || {{reichelt|article=58322}} || 3.60 || eLab
|-
| ATTINY 45V-10SU || 2 || {{reichelt|article=68164}} || 3.60 || eLab
|-
| HAL-REF 35F-GU10 :: Halogen-Spiegel, GU10, Ø50mm, 230V, 35W||1|| {{reichelt|article=47969}}||1.00|| eLab
|-
| LM317 || 10 || {{reichelt|120703}} || 2.20 || eLab
|}

===WK1===
Satz Grundtonquarze in HC49S, gesamtpreis 7.16 EUR
<pre>
20,0000-HC49U-S;3
16,0000-HC49U-S;5
14,7456-HC49U-S;1
10,0000-HC49U-S;1
4,0000-HC49U-S;1
4,0960-HC49U-S;1
3,5795-HC49U-S;1
4,4336-HC49U-S;1
7,3728-HC49U-S;1
8,0000-HC49U-S;5
3,6864-HC49U-S;1
4,9152-HC49U-S;1
9,8304-HC49U-S;1
6,1440-HC49U-S;1
14,0000-HC49U-S;1
12,0000-HC49U-S;5
4,1943-HC49U-S;1
6,0000-HC49U-S;1
11,0592-HC49U-S;1
18,4320-HC49U-S;1
18,0000-HC49U-S;1
15,0000-HC49U-S;1
10,2400-HC49U-S;1
5,0000-HC49U-S;1
12,2880-HC49U-S;1
</pre>

Inventory/Meta/Ordering

2014-02-09T15:56:55Z

Miga: /* Wishlist */ Zusätz: polyfuse

This page contains the list of parts we may order next:
__FORCETOC__
{| class="wikitable"
! Part
! Amount
! Where
|-
| 2x5 Female Header (IDC) || || {{reichelt|article=14571}}
|-
| USB B || ||
|-
| Optokoppler, zB PC817 || 10 ||
|-
| Streifenrasterplatinen || 5 ||
|}

== Wishlist ==
Everything that hasn't been in the lab up until now but you really want it:
{| class="wikitable"
! Part
! Amount
! Where
|-
|
! Polyfuse 800mA (e.g. USB 2.0 polyfuse)
! 5-10
! ?
|-
|
! Polyfuse 50mA (e.g. ATmega GPIO polyfuse)
! 5-10
! ?
|-
|}

== Immer mal wieder ==
{| class="wikitable"
! Part
! Amount
! Where
|-
| 1k metal film resistors, leaded || >= 1000 || 1* {{digikey|keywords=S1KCATR-ND}} or 1000 * {{reichelt|article=11403}}
|-
| {{ds|FT232R}} USB-UART Transceiver, SSOP-28 || Notiz: wir haben noch 4x USB-UART brett billiger wie Reichelt! || {{reichelt|article=64399}}
|-
|{{ii| 2x5 Female Header (IDC) || || {{reichelt|article=14571}}
|}

== Next Reichelt ==
{| class="wikitable"
! Part
! Amount
! Where
! Full Price
! Account
|-
| Heizungsregler || 2 || {{reichelt|article=102691}} || 29.90 || Verein
|-
| Seitenschneider || 2 || {{reichelt|article=44687}} || 35.30 || Verein
|-
| Entloetlitze || 1 || {{reichelt|article=7390}} || 14.40 || eLab
|-
| Grundtonquarze || 1 || [[#WK1]] || 7.16 || eLab
|-
| R 1k || 100 || {{reichelt|article=11403}} || 2.25 || eLab
|-
| ATTINY 13-20 SO || 3 || {{reichelt|article=58322}} || 3.60 || eLab
|-
| ATTINY 45V-10SU || 2 || {{reichelt|article=68164}} || 3.60 || eLab
|-
| HAL-REF 35F-GU10 :: Halogen-Spiegel, GU10, Ø50mm, 230V, 35W||1|| {{reichelt|article=47969}}||1.00|| eLab
|-
| LM317 || 10 || {{reichelt|120703}} || 2.20 || eLab
|}

===WK1===
Satz Grundtonquarze in HC49S, gesamtpreis 7.16 EUR
<pre>
20,0000-HC49U-S;3
16,0000-HC49U-S;5
14,7456-HC49U-S;1
10,0000-HC49U-S;1
4,0000-HC49U-S;1
4,0960-HC49U-S;1
3,5795-HC49U-S;1
4,4336-HC49U-S;1
7,3728-HC49U-S;1
8,0000-HC49U-S;5
3,6864-HC49U-S;1
4,9152-HC49U-S;1
9,8304-HC49U-S;1
6,1440-HC49U-S;1
14,0000-HC49U-S;1
12,0000-HC49U-S;5
4,1943-HC49U-S;1
6,0000-HC49U-S;1
11,0592-HC49U-S;1
18,4320-HC49U-S;1
18,0000-HC49U-S;1
15,0000-HC49U-S;1
10,2400-HC49U-S;1
5,0000-HC49U-S;1
12,2880-HC49U-S;1
</pre>

Datei:Button pad.jpg

2014-02-09T15:28:39Z

Miga:

Inventory/Mechanical Devices

2014-02-09T15:28:29Z

Miga: /* Pushbuttons */ Zusätz: 5-button pad

==Switches==
{{Inventory Table Header|Type}}
{{ii| Quad SMD DIP Switch | SO-DIP8 | Mechanisches | 42 | 0.25 EUR ([[Benutzer:Marvin]]), [http://de.farnell.com/apem/ikn0403000/dip-schalter/dp/1703842] | photo=20110705_001.jpg}}
{{ii| 12x DIP switch | | Box 2 | 3 | 0.30 EUR? | photo=Nase_20110717_028.jpg}}
{{ii| SMT Switch | | Box 2 | ~15 | 0.05 EUR | photo=Nase_20110725_034.jpg}}
{{ii| Switch | | Box 2 | 2 | 0.30 EUR | photo=Nase_20110725_033.jpg}}
{{Inventory Table Footer}}

==Pushbuttons==
{{Inventory Table Header|Type}}
{{ii| Pushbutton | | Box 2 | ~30 | 0.05 EUR | photo=Nase_20110717_025.jpg}}
{{ii| Pushbutton | | Box 2 | 0 | 0.30 EUR | photo=Nase_20110717_027.jpg}}
{{ii| Pushbutton | | Box 2 | 0 | 0.15 EUR | photo=Nase_20110725_029.jpg}}
{{ii| Pushbutton | | Box 2 | ~20 | 0.05 EUR | photo=Nase_20110725_031.jpg}}
{{ii| Pushbutton | | Box 2 | 3 | 0.15 EUR | photo=Nase_20110725_032.jpg}}
{{ii| Pushbutton | used and really crappy| Box 2 | 6 | 0.05 EUR | photo=Nase_20110725_036.jpg}}
{{ii| Fabric 5xbutton | | Mechanical devices | 1 | 16.81 EUR | photo=button_pad.jpg}}
{{Inventory Table Footer}}

==Joystick==
{{Inventory Table Header|Type}}
{{ii| 4-way joystick | | Box 2 | 1 | 2 EUR | photo=Nase_20110725_042.jpg}}
{{Inventory Table Footer}}

==Encoders==
{{Inventory Table Header|Type}}
{{ii| ALPS EC11 18-step without button | | Box 2 | 4 | 1 EUR | photo=Nase_20110725_035.jpg}}
{{Inventory Table Footer}}

==Relays==
{{Inventory Table Header|Type}}
{{ii| {{ds|JSM1|JSM1a-9V-5}} | SPST Relay, V_{coil}{{eq}} 9 V | Mechanisches | 10 | 0.50 | photo=Nase_20110717_032.jpg}}
{{ii| {{ds|G6S|G6S-2G-Y}} | DPDT Relay, V_{coil}{{eq}}24 V | Mechanisches | 28 | 0.30 | photo=Nase_20110717_033.jpg}}
{{ii| | SPDT Relay, V_{coil}{{eq}}12 V | Mechanisches | 7 | 0.40 | photo=Nase_20110725_077.jpg}}
{{Inventory Table Footer}}

==Connectors, Screw Terminals and Headers==
{{Inventory Table Header|Type}}
{{ii| Lustre Terminal | black | Mechanisches | 47 | tbd | photo=20110705_002.jpg}}
{{ii| Straight Pin Header | RM 100 | Pin Header Straight M-M | > 1000 | 0.005 EUR / pin | photo=20110705_003.jpg}}
{{ii| Pin Header 90 degrees | RM 100 | Pin Headers 90 | > 200 | 0.005 EUR / pin | photo=20110705_005.jpg}}
{{ii| Female Pin Header | RM 100 | Pin Headers M-F | 255 | 0.01 EUR / pin ({{csd|014-B140G}}) | photo=20110705_006.jpg}}
{{ii| Jumper | | Mechanisches | ~20 | 0.01 EUR }}
{{ii| 2x3 Shrouded Header | RM 100 | Mechanisches | 2 | | photo=Nase_20111013_025.jpg}}
{{ii| 2x3 Female Header (IDC) | RM 100 | Mechanisches | 2 | | photo=Nase_20111013_023.jpg}}
{{ii| 2x5 Shrouded Header | RM 100 | Mechanisches | ~23 | 0.08 EUR ({{reichelt|article=22816}}) | photo=20110705_007.jpg}}
{{ii| 2x5 Female Header (IDC) | RM 100 | Mechanisches | 20 | 0.08 EUR ({{reichelt|article=14571}}) | photo=20110705_008.jpg}}
{{ii| 2x8 Shrouded Header | RM 100 | Mechanisches | 2 | | photo=Nase_20111013_021.jpg}}
{{ii| 2x8 Female Header (IDC) | RM 100 | Mechanisches | 2 | | photo=Nase_20111013_020.jpg}}
{{ii| 2x20 Shrouded Header | RM 100 | Mechanisches | 2 | | photo=Nase_20111013_019.jpg}}
{{ii| 2x20 Female Header (IDC) | RM 100 | Mechanisches | 1 | 0.17 EUR | photo=Nase_20111013_018.jpg}}
{{ii| 5 mm input lab jack | | Mechanisches | 5 | 0.21 EUR | photo=20110705_011.jpg}}
{{ii| 5 mm lab jack | | Mechanisches | 2 | 0.15 EUR | photo=20110705_009.jpg}}
{{ii| Barrel Connector female | | Mechanisches | 0 | 0.21 EUR | photo=Nase_20110725_063.jpg}}
{{ii| Barrel Connector male | | Mechanisches | 0 | 0.30 EUR | photo=Nase_20110725_064.jpg}}
{{ii| 5mm Screw Terminal | | Mechanisches | 4 | 0.10 EUR | photo=Nase_20110725_043.jpg}}
{{ii| USB B | THT | Mechanisches | 1 | 0.20 EUR (?) | photo=Nase_20110725_061.jpg}}
{{ii| USB A | SMD | Mechanisches | 41 | tbd | photo=usb_a_smd-1.jpg}}
{{ii| Mini-USB B | THT | Mechanisches | 1 | 0.30 EUR (?) | photo=Nase_20110828_005.jpg}}
{{ii| Mini-USB B | SMD | Mechanisches | 1 | tbd | photo=Nase_20110828_005.jpg}}
{{ii| Mikro-USB B | SMD | Mechanisches | 5 | 0.30 EUR (?) | photo=Nase_20110828_012.jpg}}
{{ii| D-Sub 25-pin female | | Mechanisches | 2 | tbd | photo=Nase_20110725_073.jpg}}
{{ii| D-Sub 25-pin male | | Mechanisches | 1 | tbd | photo=Nase_20110725_067.jpg}}
{{ii| D-Sub 9-pin female pcb | | Mechanisches | 2 | tbd | photo=Nase_20110725_065.jpg}}
{{ii| D-Sub 9-pin female solder | | Mechanisches | 1 | tbd | photo=Nase_20110725_066.jpg}}
{{ii| 20-cable female cobbler | | Mechanisches | 3 | 1.30 EUR | photo=Nase_20140115_001.jpg}}
{{Inventory Table Footer}}

==Fuse holder==
{{Inventory Table Header|Type}}
{{ii| Fuse holder | | Mechanisches | 3 | tbd | photo=Nase_20110725_062.jpg}}
{{Inventory Table Footer}}

==Screws==
{{Inventory Table Header|Type}}
{{ii| M3 x 6 mm | Schlitz | Screws | > 30 | 0.01 EUR | photo=20110705_012.jpg}}
{{ii| M4 x 40 mm | Schlitz | Screws | > 30 | 0.03 EUR | photo=20110705_013.jpg}}
{{ii| M4 x 50 mm | Schlitz | Screws | > 30 | 0.03 EUR | photo=20110705_014.jpg}}
{{ii| Nut M3 | | Screws | 0 | tbd | photo=Nase_20110725_051.jpg}}
{{Inventory Table Footer}}

==Sockets==
{{Inventory Table Header|Type}}
{{ii| ZIF Socket (28 pins) | | Mechanisches | 2 | 0.50 EUR | photo=Nase_20110717_001.jpg}}
{{ii| ZIF Socket (32 pins) | | Mechanisches | 2 | 0.50 EUR | photo=Nase_20110717_002.jpg}}
{{ii| DIL-8-300 Socket | | Box 3 | 2 | 0.10 | photo=Nase_20110717_034.jpg}}
{{ii| DIL-16-300 Socket | | Box 3 | ~10 | 0.10 }}
{{ii| DIL-18-300 Socket | | Box 3 | 2 | 0.10 | photo=Nase_20110717_035.jpg}}
{{ii| DIL-28-300 Socket | | Box 3 | 1 | 0.10 | photo=Nase_20110717_036.jpg}}
{{ii| DIL-40-600 Socket | | Box 3 | 0 | 0.10 | photo=Nase_20110717_037.jpg}}
{{Inventory Table Footer}}

==Motors==
{{Inventory Table Header|Type}}
{{ii| servo motor 'micro servo 9g' (3D Model: [[Micro Servo 9G]]) | | Mechanisches | 4 | 1.88 EUR | photo=Nase_20110717_003.jpg}}

{{ii| servo motor 'RC Servo 36g 1019F01' | | Mechanisches | 2 | 2.75 EUR | photo=servo_35g.jpg}}

{{ii| Paper transport thing with switch and motor
| MBL1314A | Mechanisches | 3 | tbd | photo=Mbl1314A.jpg}}
{{Inventory Table Footer}}

==Magnets==
{{Inventory Table Header|Type}}
{{ii| several types of pull magnets| | Mechanisches | 2 | tbd | photo=Nase_20110717_005.jpg}}
{{Inventory Table Footer}}

==Breadboards==
{{Inventory Table Header|Type}}
{{ii| breadboard| | Perfboard | 5 | 2 EUR | photo=Nase_20110816_006.jpg}}
{{Inventory Table Footer}}

==Heat Sinks==
{{Inventory Table Header|Type}}
{{ii| Heat Sink| | Mechanisches | 1 | 2 EUR | photo=Nase_20110828_014.jpg}}
{{ii| Heat Sink| | Mechanisches | 1 | 3 EUR | photo=Nase_20110828_015.jpg}}
{{ii| Heat Sink| | Mechanisches | 1 | 2 EUR | photo=P1080792 half.jpg}}
{{ii| Heat Sink with fan| | Mechanisches | 1 | 5 EUR | photo=P1080795 half.jpg}}
{{Inventory Table Footer}}

==Battery holder==
{{Inventory Table Header|Type}}
{{ii| CR battery holder | | Lilypad | 5 | 0.84 EUR | photo=cr_battery_holder.jpg}}
{{ii| Lilypad 1xAAA battery holder | | Lilypad | 2 | 10.92 EUR | photo=lilypad_battery_holder.jpg}}
[[Category:Inventory]]
{{Inventory Table Footer}}

Inventory/RF

2014-02-09T15:27:01Z

Miga: Zusätz: XL7105 transceiver

{{Inventory Table Header|Type}}
{{ii| ER400TRS | | Box 3 | 2 | tbd | photo=Nase_20110718_011.jpg}}
{{ii| RX868SH-KL | (used, removed from keymatic) | Box 3 | 1 | tbd | photo=Nase_20110718_013.jpg}}
{{ii| 7105-XL 2.4GHz | With signal strength register | Box 3 | 4 | 1.99e | photo=transceiver_xl7105.jpg}}
{{Inventory Table Footer}}
[[Category:Inventory]]

Datei:Transceiver xl7105.jpg

2014-02-09T15:26:20Z

Miga:

Inventory/Microcontrollers

2014-02-09T15:23:27Z

Miga: /* AVR */ Zusätz: Flora

==AVR==
{{Inventory Table Header|Type}}
{{ii| {{ds|atmega16|ATMEGA16-16PU}} | | Box 4 | 3 | 3.65 EUR, {{Reichelt|article=45028}} | photo=Nase_20110717_042.jpg}}
{{ii| {{ds|atmega8|ATMEGA8L-8PU}} | | Box 4 | 0 | 2.20 EUR {{Reichelt|article=45025}} | photo=Nase_20110718_001.jpg}}
{{ii| {{ds|atmega88|ATMEGA88-20AU}} | | Box 4 | 4 | 2.95 EUR, {{Reichelt|article=68168}} | photo=Nase_20110729_001.jpg}}
{{ii| {{ds|at90s1200|AT90S1200-16PC}} | | Box 4 | 2 | tbd | photo=Nase_20110718_002.jpg}}
{{ii| {{ds|attiny2313|ATTINY2313-20PU}} | | Box 4 | 3 | tbd | photo=Nase_20110725_023.jpg}}
{{ii| {{ds|attiny1320|ATTINY13 20-SO}} | | Box 4 | 3 | tbd |}}
{{ii| {{ds|attiny45V-10SI|ATTINY45V-10SI}} | | Box 4 | 3 | tbd |}}
{{ii| {{ds|flora|ATMEGA328V-8PU}} | | Lilypad | 4 | 15e | photo=flora.jpg }}

{{Inventory Table Footer}}

==MSP430==
{{Inventory Table Header|Type}}
{{ii| {{ds|MSP430G2231}} | | Box 4 | 2 | tbd | photo=Nase_20110718_003.jpg}}
{{ii| {{ds|MSP430G2201}} | | Box 4 | 3 | tbd | photo=Nase_20110718_004.jpg}}
{{Inventory Table Footer}}

==PIC==
{{Inventory Table Header|Type}}
{{ii| {{ds|PIC16F877}} | | Box 4 | 1 | tbd | photo=Nase_20110718_005.jpg}}
{{ii| {{ds|PIC16F84}} | | Box 4 | 3 | tbd | photo=Nase_20110718_006.jpg}}
{{ii| {{ds|PIC32MX}} | | Box 4 | 3 | tbd | photo=PIC32MX.jpg}}
{{Inventory Table Footer}}

==8051==
{{Inventory Table Header|Type}}
{{ii| {{ds|C8051F330}} | | Box 4 | 2 | tbd | photo=Nase_20110718_014.jpg}}
{{Inventory Table Footer}}

[[Category:Inventory]]

Datei:Flora.jpg

2014-02-09T15:23:09Z

Miga:

Inventory/ICs

2014-02-09T15:19:02Z

Miga: /* Transceiver */ Zusätz: USB-TTL

==Timer==
{{Inventory Table Header|Type}}
{{ii| 556 | DIP, 2 Timers like NE555 | Box 3 | 6 | 0.32 rei | photo=Nase_20110717_039.jpg}}
{{ii| 555 | DIP, Timer | Box 3 | 4 | 0.19 rei | photo=Nase_20110717_040.jpg}}
{{ii| 555 | SOIC, Timer | Box 3 | 10 | 0.18 rei | }}
{{Inventory Table Footer}}

==Voltage Regulator==
{{Inventory Table Header|Type}}
{{ii| 7805 | 5 V | Box 3 | 2 | tbd | photo=Nase_20110718_008.jpg}}
{{ii| 78L05 | 5 V (SOIC version of 7805, lower current and power ratings) | Box 3 | 4 | tbd | photo=Nase_20110828_007.jpg}}
{{ii| 7905 | -5 V, used | Box 3 | 10 | tbd | photo=Nase_20110718_009.jpg}}
{{ii| 7812 | 12 V, used | Box 3 | 2 | tbd | photo=Nase_20110718_010.jpg}}
{{ii| {{ds|LD33A}} | 3.3 V | Box 3 | 3 | tbd | photo=Nase_20110725_056.jpg}}
{{ii| {{ds|AMS1117-50}} | 5 V | Box 3 | 2 | tbd | photo=Nase_20110725_055.jpg}}
{{ii| {{ds|AMS1117-33}} | 3.3 V | Box 3 | 50 | ,12€ | }}
{{ii| {{ds|AMS1117-18}} | 1.8 V | Box 3 | 4 | tbd | photo=Nase_20110828_006.jpg}}
{{ii| {{ds|AMS1117-12}} | 1.2 V | Box 3 | 3 | tbd | photo=Nase_20110828_003.jpg}}
{{ii| {{ds|MC34063A}} | Switching Regulator, Adjustable | Box 3 | 1 | tbd | photo=Nase_20110725_040.jpg}}
{{ii| LM317 | TO-220, Adjustable | Box 3 | 0 | 0.26 | photo=Nase_20110726_001.jpg}}
{{Inventory Table Footer}}

==RS232 Driver==
{{Inventory Table Header|Type}}
{{ii| {{ds|MAX233epp}} | | Box 3 | 4 | tbd | photo=Nase_20110725_022.jpg}}
{{Inventory Table Footer}}

==Transceiver==
{{Inventory Table Header|Type}}
{{ii| {{ds|FT232R}} | USB-UART Transceiver, SSOP-28 | Box 4 | 4 | {{reichelt|article=64399}} | photo=Nase_20110816_004.jpg}}
{{ii| {{ds|ENC28J60}} | 10 MBit/s Ethernet Transceiver with SPI, DIL| Box 4 | 2 | {{reichelt|article=89340}} | photo=Nase_20110828_013.jpg}}
{{ii| {{ds|USB-TTL Programmierer}} | CP2102 serial/programmierer/2xGPIO, USB 2.0 | USB-TTL | 4 | 2.11e | photo=usb_ttl_inv.jpg}}
{{Inventory Table Footer|Type}}

==1-Wire==
{{Inventory Table Header|Type}}
{{ii| [http://datasheets.maxim-ic.com/en/ds/DS18S20.pdf DS1820] | 1-Wire temperature sensor | ICs | 0 | | photo=Nase 20111013 003.jpg}}
{{ii| [http://datasheets.maxim-ic.com/en/ds/DS18B20.pdf DS18B20] | 1-Wire temperature sensor | ICs | 10 |0,99€ | photo=Nase 20111013 003.jpg}}
{{ii| [http://datasheets.maxim-ic.com/en/ds/DS2405.pdf DS2405] | 1-Wire Addressable Switch | ICs | 2 | | photo=Nase 20111013 003.jpg}}
{{ii| [http://datasheets.maxim-ic.com/en/ds/DS2401.pdf DS2401] | 1-Wire Silicon Serial Number | ICs | 1| | photo=Nase 20111013 003.jpg}}

{{ii| [http://datasheets.maxim-ic.com/en/ds/DS1822.pdf DS1822] | 1-Wire Econo Digital Thermometer | ICs |2 | | | photo=Nase 20111013 003.jpg}}
{{ii| [http://datasheets.maxim-ic.com/en/ds/DS2890.pdf DS2890] | 1-Wire Digital Potentiometer | ICs | 2 | | photo=Nase 20111013 003.jpg}}
{{ii| [http://datasheets.maximintegrated.com/en/ds/DS2415.pdf DS2415P] | 1-Wire Time Chip | ICs | 2 | | }}
{{ii| DS28E04-100 | 4096-bit addressable 1-Wire EEPROM with PIO | ICs | 1 | | photo=Nase 20111013 006.jpg}}
{{ii| [http://datasheets.maximintegrated.com/en/ds/DS2408.pdf DS2408S] | 1-Wire 8-Channel Addressable Switch | ICs | 2 | | photo=Nase 20111013 006.jpg}}
{{ii| DS2490 | USB to 1-Wire Bridge Chip | ICs | 1 | | photo=Nase 20111013 008.jpg}}
{{ii| DS? | 1-Wire ? | ICs | 1 | | photo=Nase 20111013 012.jpg}}
{{ii| DS2480 | Serial 1-Wire Line Driver | ICs | 1 | | photo=Nase 20111013 017.jpg}}
{{ii| [http://docs-europe.electrocomponents.com/webdocs/0f63/0900766b80f631c6.pdf DS2413] | 1-Wire dual-channel programmable I/O | ICs | 7 | 2.60 € | }}
{{Inventory Table Footer}}

==I2C==
{{Inventory Table Header|Type}}
{{ii| DS2782 | Stand-Alone Fuel Gauge IC | ICs | 1 | | photo=Nase 20111013 014.jpg}}
{{Inventory Table Footer}}

[[Category:Inventory]]

Datei:Lilypad battery holder.jpg

2014-02-09T15:18:28Z

Miga:

Datei:Cr battery holder.jpg

2014-02-09T15:18:18Z

Miga: